Operation
Power height adjustment
The powerfoot on your vacuum can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting.
1.Place handle in upright position.
2.Turn height adjustment knob to desired setting.
Lowest Setting | – | For bare floors. |
Medium Settings | – For short and medium | |
|
| pile carpets. |
Highest Setting | – | For plush pile carpet. |
NOTE: You may also adjust the setting while in the normal cleaning position.
Special tools
Tip:
Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose.
1.
Your vacuum is not only a powerful floor vacuum cleaner, it’s also a versatile stairs and above floor vacuum when you select one of the special tools.
Note: The tools can be used with the vacuum in the Upright Position or with the Detachable Canister.
1.Detach the vacuum hose by grasping the hose grip and lifting to separate from the hose grip base.
2.Attach tools by firmly pushing onto vacuum hose or telescoping extension wand.
Combination dusting brush/upholstery tool: Two types of cleaning tools are included in one attachment. Rotate for desired tool.
■Use brush side to dust furniture, blinds, books, lamps, shelves, and baseboards.
■Use upholstery side for curtains, draperies, cushions, fabrics.
Crevice tool:
Use in tight narrow spaces.
Telescoping extension wand:
Use with desired attachment for a longer reach. To extend the wand, twist the collar to “Unlock” posi- tion and push away from you. Twist the collar to the “Lock” position to lock into place. To retract, twist to unlock, pull toward you and twist to relock.
w w w . b i s s e l l . c o m
caution:
Always place vacuum cleaner on floor in its fully Upright Position and make sure it is locked into place before removing Canister or when using tools. Placing the
8 0 0 . 2 3 7 . 7 6 9 1 | 7 |
2009.2.28 11:36:58 AM