How To Use This Guide
This User’s Guide has been designed to help you get the most satisfaction from your BISSELL CleanView. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they fit. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL Clean- View for many years.
How To Put It Together
The only tool you’ll need to assemble your vacuum cleaner is a screwdriver.
W A R N I N G :
Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.
Attach Handle To Vacuum
Locate the vacuum Handle and remove the screw packet
1. taped to the base of the Handle.
Stand the vacuum upright and slide the base of the Handle
2. firmly into the grooves at the top of the vacuum body.
Check to be sure the Handle is fitted to the vacuum
3. body. If there is a gap in front, continue to push firmly until the Handle is flush.
Insert one screw provided from the screw packet into the
4. existing hole. Tighten securely with a screwdriver.
Attach Vacuum Hose and Tools
Position the Hose Assembly on the back of the vacuum
1. as shown.
2.
Grasping the Quick Reach Handle, slide the end of the
3. Hose Wand onto the suction intake opening. Snap the Hose into the Hose Clip.
NOTE: The Powerfoot will not operate effectively unless the hose wand is firmly attached to the suction intake opening.
5