Bissell 44M3, 67F8 warranty Pet TurboBrush Tool Maintenance

Page 14

Maintenance and care

Pet TurboBrush® Tool Maintenance

NOTE: 67F8 models include the Pet

TurboEraser™ Tool that follows the2. same maintenance steps as the Pet

TurboBrush® Tool.

1.Turn power OFF. Unplug vacuum cord from electrical outlet.

2.Turn tool so bottom side faces up and remove the two screws.

3.Remove the faceplate and clear any obstructions.

4.Remove the brush from the drive belt to clean debris.

5.Reposition the drive belt on the brush, and place ends of brush in slots on the side. Reposition faceplate and secure with two screws.

NOTE: This tool is designed to remove pet hair from upholstered or carpeted surfaces. It should not be used on pets.

14

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Image 14

Contents

Earn Bissell Rewards Thanks for buying a Bissell Vacuum Important Safety Instructions Reduce the risk of fire, electric shock, or injuryProduct view Attach vacuum hose and tools AssemblyAttach handle to vacuum You need Phillips head screwdriverOperations Automatic power cord rewindPower switch Handle positionHeight adjustment TipClean filter indicator Pet hair lifterTools Empty Dirt Container Maintenance and care Empty when dirt reaches the Full line on the container Pre-motor protects the motor from debris Cleaning the inner & outer circular filtersCleaning the pre-motor filter Replacing the post-motor filter Checking rotating floor brush and drive beltReplace drive belt Pet TurboBrush Tool Maintenance Replace Headlight Using a flat screwdriver, table knife orClearing clogs Check the suction inlet for a clogTroubleshooting Thank you for selecting a Bissell product Part NameAccessories Bissell vacuum If your Bissell product should require service Warranty Bissell VacuumLimited Three Year Warranty Dont forget to register your product Bissell Consumer ServicesBissell consumer services