5.The strap should then be placed through the child’s right latch plate (back to front), up through the chest clip and through the appropriate shoulder belt slot ontheseatback.
6.Fasten the loop on the end of the strap to the second metal hook.
7.Check to be sure that the webbing is not twisted. The web should lie flat against the bottom of the seat shell.
Maintenance and Care
Washing the Cover and Harness
1.Remove the harness from the Sit’n’Stroll™ and detach all buckles.
2.Release the clips securing the fabric cover to the car seat and remove the cover from the plastic shell.
3.Wash the cover and harness in cold water on gentle cycle with a mild detergent. Do not use bleach.Rollintoweltoremoveexcesswaterafter rinsing.Hang the fabric cover to dry or tumble dry without heat. Do not dry in a heated dryer.
Washing the Shell
Wash the car seat shell and stroller parts with a mild soap and warm water using a soft cloth or sponge.
Wheels and Handle System
If needed, clean the wheels and telescoping handle with Armor All®spray lubricant.
To lubricate the moving parts of the Sit’n’Stroll™, use a silicon
Replacement Parts
We have carefully designed all of the high wear parts of the Sit’n’Stroll™ to be easily replaceable. For increased longevity and years of enjoyment, contact our main office to order replacement parts at reasonable prices.
28
