Safeline Sit'n'Stroll manual

Lap/Shoulder Belt with Buckle Tongue that

Slides Freely Along Seat Belt Webbing

Freeslidinglap/shoulderbeltshaveafreeslidinglatch platethatdoesnotlocktothebelt. Whenplacingthe Sit’n’Stroll™inseatingpositionsequippedwiththis system,youmustusealockingcliptopreventtheseat beltfromslipping,unlessithasaswitchableretractor.

1.Place the vehicle lap belt around the front of the Sit’n’Stroll™ and position it through the appropriate forward-facing vehicle belt path. Click the latch plate into the buckle.

2.Push down firmly on the Sit’n’Stroll™ to sink it into the car’s seat cushion, while pulling on the shoulder part of the lap/shoulder belt. You may have to press on one armrest at a time to get the auto belt tight. Pull the seat belt as tight as possible across the unit.

3.Hold the lap and shoulder belts together behind the latch plate. Unbuckle the belt while holding the belts together.

4.Thread the locking clip onto both belts , placing it as close to the latch plate as possible .

5.Buckle the vehicle belt again. It may be necessary to press the Sit’n’Stroll™ into the auto seat cushion to get it buckled. The belt should be tight around the restraint. If it is not, remove the locking clip and repeat steps 1-4. If the child restraint cannot be held tightly, move it to another seating location. If there is not a position that will keep the child restraint secured with a lap belt, contact your vehicle dealer to have a lap belt installed in your vehicle.

6.Secure the top tether to the vehicle tether anchor if desired.

19