The Sit’n’Stroll™ is designed to be converted from car seat to
Tips stroller and back again while holding the child, still secured in the Sit’n’Stroll™, OFF THE GROUND. If the Sit’n’Stroll™ is converted on the ground, the mechanism may jam.
The Sit’n’Stroll™ is to be used onl y by one child at a time. Never place more than one child in the seat.
Until you are well practiced in following these
instructions, do not attempt to convert from car seat to stroller or vice/versa with your child in the seat.
Always secure your child using the Sit’n’Stroll™’ s
Individuals with a history of back trouble are advised to excercise caution or refrain from quick movement when converting the Sit’n’Stroll with a child in it. Do not attempt to convert the unit if you are at risk of back injury.
WARNING
Excess weight placed in the storage bin may cause a hazardous unstable condition. The manufacturer recommends not to exceed 10 pounds. Parcels or accessory items or both placed on the unit may cause the unit to become unstable.
Handle
Slot
Slider
Grip
1.Place one hand in the handle slot located between your infant’s feet. With your other hand, grasp the slider grip located on the back of the Sit’n’Stroll™. Gripping both handles securely, remove the Sit’n’Stroll™ from your vehicle. Squeeze the red lock release evenly with your fingers and move the slider grip down. This deploys the wheels.
2.When the slider stops, relax your finger pressure on the red lock release and allow it to latch securely in its lowest position. Pull up on the grip without squeezing the red lock release to ensure the wheels are locked. Place the Sit’n’Stroll™ on the ground.
22
