Theharnessmustalwaysberoutedthrough(i.e.behindand under)theplasticshell.Neverroutetheharnessthroughthe fabriccoveronly.
Removing the Harness
Toremovethefabriccoverforwashingitwillbenecessarytoremovetheharnesssystem.
1.Unhook the shoulder belt loops from the metal hooks at the back of the seat.
2.Pull the shoulder belts through the seat back from the front of the seat.
3.Remove the chest clip half from the child’s right shoulder belt.
4.The right shoulder belt continues down through the latch plate and under the seat bottom. Pull this belt all the way out from under the seat so it comes out the child’s left side (your right side when facing the front of the Sit’n’StrollTM). The upper part of the harness is now free of the seat pad.
5.Release the latch plates from the buckle. Gently slide the buckle down through the crotch strap slot in the fabric cover being careful to not tear the pad slot. Turning the buckle sideways may help it fit through the pad slot.
6.The fabric cover is now free to be unclipped from the shell and removed for washing.
Installing the Harness
1.Be sure the fabric cover is on and gently slide the buckle up through the crotch strap slot. Turning the buckle sideways may help it fit through the crotch strap slot.
2.Replacethelatchplatesintothebuckleandsnapthechestcliptogether. The Sit’n’StrollTM should be in the stroller position with the telescoping handle down.
3.Be sure the harness adjuster is on the child’s left side of the seat (your right while facing the Sit’n’Stroll™ ). Slide the upper adjuster belt loop through the appropri- ate shoulder belt slot to the back of the seat and fasten to the metal hook.
4.Push the long shoulder belt down through the slot at the child’s left hip, around the bottom of the shell and up through the slot near the child’s right hip.
27
