Safeline Sit'n'Stroll manual Automatic passive Seat Belts

There are some vehicle seat belt systems which will not securely restrain the Sit’n’Stroll™ . Follow the instruc- tions in this manual and in the vehicle manual exactly to assure correct installation.

Never use only the top tether to install the Sit’n’Stroll™ . It is necessary to use the vehicle seat belt system with the top tether. Serious injury or death could result if only the top tether is used.

If you do not use the top tether, remove the tether from the Sit’n’Stroll™ and store in a secure location. An unsecured top tether could cause

Tips injury if not properly used.

For your child’s safety, the Sit’n’Stroll™’s patented design provides double-belted protection for your child and is designed to use your automobile’s seat belt the way it was originally designed—to go across the front of the occupant.

Check your vehicle to determine which type of seat belt system you have. Some vehicles have more than one type of belt system depending on the seating position. The center rear position may have a lap only belt while the side seating locations may have a lap-shoulder system. If you are not sure which system you have, check your vehicle owner’s manual or contact your vehicle dealer or manufacturer.

Automatic (passive) Seat Belts

See picture below showing shoulder belt attached to automobile door.

Neveruseanautomaticseatbeltsystemtosecure theSit’n’Stroll™inthevehicle. Thebelt(s)move asthecardoorisopenedortheengineisstarted andwillnotproperlysecuretheSit’n’Stroll™.

16