Safeline Sit'n'Stroll manual Be sure the vehicle seat belts are not twisted

1.Place the Sit’n’Stroll™ in the vehicle forward facing.

2.Place the lap belt around the front of the Sit’n’Stroll™ and position it through the appropriate forward-facing vehicle belt path. Click the latch plate into the buckle.

3.Push down firmly on the Sit’n’Stroll™ to sink it into the car’s seat cushion while pulling on the end of the lap belt or shoulder part of the lap/ shoulder belt. You may have to press on one armrest at a time to get the auto belt tight. Pull the seat belt as tight as possible across the unit.

4.Secure the top tether to the vehicle tether anchor if desired.

5.Rock the Sit’n’Stroll™ sideways and pull it forward from the vehicle’s seat to check it is securely tightened. If it moves away from the vehicle seat, retighten the vehicle seat belts.

6.If you have tightened the belt and it is still not secure, move it to another seating location and repeat steps 1-5. If there is no location in your vehicle that will securely hold the restraint, do not use it! Contact your vehicle dealer to have a vehicle belt installed that will remain tight.

Be sure the vehicle seat belts are not twisted.

Switchable Retractors

This type of seat belt system stays loose during normal driving. However, they have special retractors which allow use with child restraints. Read your vehicle owner’s manual and look for a label on the vehicle seat belt. Note: Not all vehicle belts with switchable retractors have instructions for securing child restraints on the vehicle belt.

1.Pull the vehicle belt all the way out. You may hear a ratchet sound as the belt retracts into the car frame.

2.Follow steps 1-5 in the directions for manually adjusted belts above.

3.Ensure the vehicle belt is securely locked by pulling slowly on the shoulder portion of the belt. It should remain locked. If it is not locked, allow the car seat belt to fully retract and repeat.

18