Maintenance and care
To maintain maximum cleaning performance from your BISSELL PowerForce Turbo Bagless, perform these simple maintenance steps.
1.Empty the dirt container when the dirt reaches the “Full” line on the side.
2.Check the inner and outer circular filters, and the
3.Replace the HEPA media
Note: More frequent filter cleaning or replacing may be necessary if you are vacuuming new carpet, fine dust, or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps.
Emptying dirt container
The dirt container needs to be emptied when the dirt reaches the “Full” line on the side of the container.
1.Unplug cleaner from electrical outlet.
2.Slide the Lock ‘n Seal lever to the "Unlock" position.
3.Grasp handle and pull dirt container straight out to remove from vacuum.
4.Empty dirt into garbage container.
5.Put dirt container back in the vacuum and slide the lever to the "Lock" position.
Note: The dirt container may be washed in warm water with a mild detergent. Remove the filter cup from the bottom before washing. Make sure it is completely dry before reassembling with the filter cup.
8 w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Tip:
For maximum cleaning performance, check and clean or replace all filters as suggested.
Full Line
Unlock |
| Lock Position | ||
Position |
|
|
| |
|
|
| ||
|
|
|
| |
10/14/08 2:40:21 PM