How to use this guide
This user’s guide has been designed to help you get the maximum satisfaction from your ReadyDry carpet washer. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this user’s guide thoroughly before assembling your carpet washer.
Your carpet washer comes in three easy to assemble components:
•Handle assembly
•Upper hose wrap
•Lower body assembly
Four Phillips head screws are included and can be found taped to the handle assembly.
Assembly
The only tool you will need to assemble your ReadyDry is a Phillips head screwdriver.
1.Slide upper handle into lower body assembly and secure with 2 screws.
2.Attach upper hose wrap using 2 screws.
3.Wrap hose clockwise around the upper and lower hose wraps as shown on page 4. Be sure to properly secure grip into the notched holder.
4.Keep hose locked in place with the secure latch.
5.Wrap the power cord as shown on page 4.
6.Place Oxy Gen2 PowerTool in the center tool caddy and the tough stain tool on the hose wand.
Warning:
Do not plug in your carpet washer until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Tip: Regular carpet cleaning can reduce dust and allergens in your home.
1.
2a.
2b.
Upper Hose
Wrap Screws
Upper Handle
Screws
w w w . b i s s e l l . c o m
5