Bissell 8804 DirtLifter PowerBrush, Tank-in-Tank, Carry it like a bucket to fill at the sink

Page 6

SmartMix® (Continued)

6.Choose the SmartMix setting that fits the cleaning job.

•Water Only – use for gentle cleaning or for the final rinse after cleaning.

SmartMix® Tank

HIGHTRAFFIC

NORMAL

WATER

ONLY

•Normal – automatically provides the

best mix of water and concentrate for most cleaning jobs.

•High Traffic – automatically mixes the right amounts of water and concentrate to dissolve tough grime and heavy soil.

NOTE: Residual cleaning materials left in carpet from other products may cause excessive foaming when picked up. If foam is overflowing tank, move SmartMix dial to “Water Only” position until the condition stops.

DirtLifter® PowerBrush

The powered brush roll at the floor nozzle is designed to enhance cleaning performance. The bristle pattern lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the power switch ON. When the machine handle is in the fully upright position, CarpetSaver™ automatically raises the brush off the carpet.

Tank-in-Tank™

The Tank-in Tank is designed with a bladder inside for clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder.

1.Step on handle release to lay the machine handle down out of the way.

2.Lift the Tank-in-Tank™handle. The handle locks the lid in place.

3.Carry it like a bucket to fill at the sink.

4.Set the tank down and rotate the handle forward to unlatch the lid. Lift off and set the lid aside.

NOTE: Both the SmartMix Tank and the clean water tank must have liquid in them in order for the machine to spray. If one tank is empty the machine will not apply either cleaning solution or water only. If you’re using the WATER ONLY setting, fill the SmartMix® Tank with water also.

 

NOTE: You may notice hair and debris deposits on

 

the carpet that were loosened by the brushing action

 

(Especially with newer carpets that have never been

 

deep cleaned before). This debris should be picked

 

up by hand and thrown away. Debris that deposits

6

in the Brush Belt area should be cleaned out

between uses to keep the Belts running free.

 

When filling bottle or storing unit, set

dial to:

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

Tip:

Deep cleaning stairs and high traffic areas on a regular basis can prolong carpet life.

Tilt Handle back

Handle Release

Lift and

Carry

Rotate

Handle to

Unlatch

ug310-5926_1697_1205.indd 6

12/21/05 3:51:34 PM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents
PowerSteamer Series Thanks For Buying a Bissell PowerSteamer Deep Cleaner Do not immerse Read all instructions before using yourDo not leave machine when it is plugged Do not use with damaged cord or plugProduct View How To Assemble Basics How Your PowerSteamer WorksSmartMix Tank-in-Tank DirtLifter PowerBrushChoose the SmartMix setting that fits the cleaning job Carry it like a bucket to fill at the sinkCarry the Tank-in-Tank, like a bucket, to the sink where Emptying Tank-in-TankRemove the Tank-in-Tank follow steps 1 Pour Out You will dispose of the dirty waterHow To Clean Carpet Flow IndicatorReadyTools Dial Machine Preparation Normal CleaningPlug into a proper outlet and turn the Power switch on Pre-Treating OptionalCleaning Fluid Section Cleaning TechniqueImportant Check Upholstery Tags Tilt Handle Back Handle Release Carrying Cap Rotor Filter Remove the black brush arm that holds the brush in placeRe-install the brush into the base of the unit TroubleshootingTo Install The Replacement Pump Belt Assembly is now completeReduced Spray Or No Spray Poor tool position. Handheld attachments onlyTank Assembly Complete Bissell Consumer ServicesReplacement Parts Replacement Brush BeltLimited One Year Warranty About Your Warranty
Top Page Image Contents