Bissell 3535 warranty Maintenance and care, Power cord, Bag change indicator select models

Page 7

Operation

Special tools

Combination upholstery/dusting brush tool: Two types of cleaning tools are included in one attachment: rotate for desired tool.

Use brush side to dust furniture, blinds, books, lamps, shelves.

Use upholstery side for curtains, draperies, cushions, fabrics.

Crevice Tool: Use in tight narrow spaces.

Extension Wand: Use with desired attachments for

a longer reach.

NOTE: When using the hose for above floor cleaning, make sure the powerfoot does not tilt forward.

Power cord

When you are done using your BISSELL PowerForce, return it to the upright position and store the power cord.

1.Turn vacuum cleaner OFF.

2.Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.

3.Loop power cord around cord wraps on side of vacuum cleaner.

4.Clip molded plug to power cord to secure.

Tip:

Your BISSELL PowerForce features a Quick ReleaseCord Wrap. To remove the power cord quickly and easily, rotate the upper cord wrap toward floor, and slip power cord from upper and lower cord wrap.

WARNING:

To reduce the risk of electric shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks.

Maintenance and care

To maintain maximum performance from your BISSELL PowerForce, perform these simple maintenance checks.

Bag change indicator (select models)

Select BISSELL PowerForce models are equipped with a bag change indicator. This indicator monitors the airflow through the dust bag and turns red to indicate a reduction or blockage. The following conditions may cause it to become completely red.

1.Dust bag is full; change the bag.

2.Dust bag is clogged with fine materials; change the bag.

3.Clog in the vacuum; clear the clog.

w w w . b i s s e l l . c o m

Tip:

Vacuuming new carpet or fine powders may clog the dust bag causing the bag change indicator to turn red even though the dust bag does not appear to be fill. Change the dust bag to restore maximum performance.

Bag Change

CHANGE BAG WHEN RED

Indicator

8 0 0 . 2 3 7 . 7 6 9 1

7

ug603-5577_3525_107.indd 7

1/22/07 2:04:31 PM

Image 7
Contents Warranty PowerForceThank you for buying a Bissell PowerForce Or injury Important Safety InstructionsProduct view Attach vacuum hose and tools How to use this guideAssembly Attach handle to vacuumHandle position Powerfoot height adjustmentHighest Setting For plush pile or Berber carpet OperationPower cord Maintenance and careBag change indicator select models Replace dust bag Never reuse a dust bagBrush CoverReplace drive belt 169Replace light bulb select models Remedies TroubleshootingClearing clog Possible causesPossible causes Remedies Vacuum cleaner difficult to push Possible causes RemediesPO Box Bissell Consumer ServicesWarranty If your Bissell product should require service