Bissell 1620 Facing upward see illustration, Set the black brush arm aside see illustration

To Remove Broken Pump & Brush Belts-Continued

		Turn the machine onto its side so the belt access area is
4.			4
		facing upward (see illustration).
		On the bottom of the machine, near the belt access area, is
5
		a red Retainer Plate that holds the black brush arm and
		brush in place. Using a Phillips head screwdriver remove
		the screw that holds the red Retainer Plate in place. Set red
		Retainer Plate and Phillips head screw aside
		(see illustration).
		Remove the black brush arm that holds the brush in place.
	6.
		Set the black brush arm aside (see illustration).
		Remove the "toothed" Brush Belt from the Brush, then from	5
	7.
		the red Pump Pulley. Set the "toothed" Brush Belt and
		Brush aside.
		Locate and remove the broken Pump Belt.
	8.

6

7

8

14

Red Retainer Plate