Bissell 1620 warranty To Fill The Tank-in-Tank, Depress the Handle Release pedal to tilt back

To Fill The Tank-in-Tank

Tilt Handle

This easy-to-use system is designed with a bladder inside the tank to hold clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder.

Depress the Handle Release pedal to tilt back

1

Back

1. the handle.

Lift the Tank-in-Tank handle. The handle locks the lid in

2. place. To fill with water, carry the Tank-in-Tank by the handle to the sink.

Set the Tank down and rotate the handle forward to

3. unlatch the Lid. Lift off and set the Lid aside.

Fill the bladder with hot tap water up to the bottom of

4. the neck. Do not boil or microwave water as it can destroy the bladder.

NOTE: Fill slowly to reduce sudsing.

5. Replace the Tank Lid, matching the Lid and Tank edges. Handle must be in the forward position to reinstall. Rotate the handle to carrying position to relatch the lid. Replace Tank in machine base, seating firmly in place. Rotate handle back and push down to latched position.

Handle

Release

Rotate Handle to

3 Unlatch

NOTE: Fill

Bladder with

4clean hot tap water only.

5

Latched