The Basics: How Your PowerLifter Plus Works
Power
The Power Switch controls power to the machine.
DirtLifter® Powerbrush
ON
OFF
Power Switch
The powered brush roll at the Floor Nozzle is designed to enhance cleaning performance. The bristle pattern lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension
SmartMix®
Tip:
Deep cleaning carpeting and upholstery regularly can reduce dust and allergens in your home.
WARNING:
To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
SmartMix
Bottle
Provides custom control for each cleaning job.
Lift the SmartMix concentrate bottle up and out of the
1. machine base.
Turn the bottle over so the valve cap is in an upward
2. position. Unscrew the cap and fill the bottle to the mark with BISSELL Deep Cleaning Formula.
3. Replace the cap until snug.
4. Replace SmartMix Bottle.
5. | Choose the SmartMix setting that fits the cleaning job. |
WATER ONLY – Provides gentle cleaning or a final |
rinse after cleaning.
NORMAL – Automatically provides the best mix of water and concentrate for most cleaning jobs.
HIGH TRAFFIC – Automatically mixes the right amount of water and concentrate to dissolve tough grime and heavy soil.
NOTE: Residual cleaning materials left in carpet from other products may cause excessive foaming when picked up. If foam is overflowing tank, move SmartMix Dial to “WATER ONLY” position until the condition stops.
NOTE: Both the SmartMix Bottle and the clean water tank must have liquid in them for the machine to spray. If one is empty, the machine will temporarily lose its prime and not apply either cleaning solution or water.
| Important: If you are using the WATER ONLY setting, be sure |
6 | to fill the SmartMix Bottle with water also! |
When filling bottle storing unit, set
Dial to:
SmartMix
Dial
HIGHTRAFFICNORMAL
WATERONLY