Rheem PVR50-80 (NAT) warranty Relief Valve, To Fill the Water Heater, Condensation

Page 10

Installing the water heater.

A new combination temperature and pressure relief valve, complying with the Standard for Relief Valves and Automatic Gas Shut-Off Devices for Hot Water Supply Systems, ANSI Z21.22, is supplied and must remain in the opening provided and marked for the purpose on the water heater. No valve of any type should be installed between the relief valve and the tank. Local codes shall govern the installation of relief valves.

Relief Valve

The pressure rating of the relief valve must not exceed 150 PSI, the maximum working pressure of the water heater as marked on the rating plate.

The Btuh rating of the relief valve must equal or exceed the Btuh input of the water heater as marked on its rating plate.

Position the outlet of the relief valve above a suitable open drain to eliminate potential water damage. Piping used should be of a type approved for hot water distribution.

The discharge line must be no smaller than the outlet of the valve and must pitch downward from the valve to allow complete drainage (by gravity) of the relief valve and discharge line.

The end of the discharge line should not be threaded or concealed and should be protected from freezing. No valve of any type, restriction, or reducer coupling should be installed in the discharge line.

WARNING: The tank must be full of water before heater is turned on. The water heater warranty does not cover damage or failure resulting from operation with an empty or partially empty tank.

To Fill the Water Heater

Make certain that the drain valve is closed, then open the shut-off valve in the cold water supply line.

Open each hot water faucet slowly to allow the air to vent from the water heater and piping.

A steady flow of water from the hot water faucet(s) indicates a full water heater.

Condensation

Condensation can form on the tank when it is first filled with water. Condensation might also occur with a heavy water draw and very cold inlet water temperatures.

Drops of water falling on the burner can produce a sizzling or pinging sound.

This condition is not unusual, and will disappear after the water becomes heated. If, however, the condensation continues, examine the piping and fittings for possible leaks.

Additional information on this subject may be found at www.rheem.com, under “Library”, scroll down to the Technical Service Bulletins 1400 Series Section and choose Bulletin #1402.

10

Image 10
Contents Water Heaters For Your Records Read the Safety InformationRead this Manual Install the Draft Hood and Properly Vent the Water HEATER… R N I N GWater Temperature Setting N G E RPage Safety Precautions For Installations in the State of CaliforniaRead and Follow this Safety Information Carefully Installing the water heater LocationCombustion and Ventilation Air Inspect ShipmentCorrosive Atmospheres Thermal Expansion Typical InstallationWater Supply Connections To Fill the Water Heater Relief ValveCondensation Gas Supply Leak TestingPressure Testing the Gas Supply System High AltitudeVenting Insulation BlanketsDuring Installation of this water heater Hot and Cold Pipe Insulation InstallationHeat Trap Water Heater Location Installation ChecklistWater Supply Combination Potable and Space Heating Application Lighting the water heater Time/Temperature Relationship in Scalds Water Temperature SettingOperating the water heater Water Temperature Setting… Draining the Water Heater Routine Preventative MaintenanceHousekeeping Vacation and Extended Shut-Down Venting System InspectionBurner Inspection Anode RodBefore You Call For Service… Problem Possible Causes What To DoRumbling noise Replacement Parts Instructions For Placing a Parts OrderIf YOU Need Service

PVR50-80 (NAT) specifications

The Rheem PVR50-80 (NAT) is a premium hot water system designed for households with high demands for hot water. Known for its reliability and efficiency, this model offers a perfect blend of innovative technology and user-friendly features, making it a great choice for both residential builders and homeowners.

One of the standout features of the Rheem PVR50-80 is its 5-star energy efficiency rating, which is made possible by the unit’s advanced heating technology. This system utilizes a gas-fired water heater with a robust 80-litre storage capacity, making it an excellent option for families with varying hot water needs. With a maximum temperature of 75 degrees Celsius, it provides ample hot water for showers, baths, and household chores, ensuring that your family will never run out.

Rheem has integrated various technologies into the PVR50-80 to enhance its performance and reliability. The unit features a reliable temperature control system that allows users to set the desired water temperature accurately. This ensures consistent temperature delivery while minimizing energy consumption and waste. Additionally, the model is equipped with a durable vitreous enamel tank, which is designed to prevent corrosion and enhance the lifespan of the water heater.

The Rheem PVR50-80 also comes with an electronic ignition system that ensures easy and safe start-up every time. This feature eliminates the need for continuous pilot lighting, leading to improved energy efficiency. Moreover, the heater includes a variety of safety features, such as a temperature-pressure relief valve, which provides peace of mind for homeowners.

Another notable characteristic of this hot water system is its compact design, allowing for flexible installation in various spaces, including tight spots in homes. The unit is compatible with both natural gas and LPG systems, making it versatile for different household setups.

Rheem stands out in the market not only for producing efficient and powerful water heaters but also for their focus on quality and durability. The PVR50-80 (NAT) is backed by an extensive warranty, reflecting the manufacturer’s confidence in its product quality.

In conclusion, the Rheem PVR50-80 (NAT) is a powerful, efficient, and reliable choice for any household that requires a steady supply of hot water. With its advanced features, durable construction, and user-friendly operation, it remains a popular option in the competitive market of hot water solutions.