Powering the Unit
The unit is powered by connecting the attached AC Cord to a standard AC Outlet (120V~60Hz)
(120V~60Hz)
Mounting the Unit to a Wall
1.Remove the table stand from the unit by pulling the tabs, located on the bottom of the unit and speakers, away from and towards the back of the unit.
2.After the stands are removed from the speakers and the main unit, designate a location for the unit to hang.
3.The speakers can be held by a single
nail or screw and the main unit is held |
|
|
| WALL | |
by two nails or screws. |
| |
|
| |
|
|
|
Be sure to drill or nail into the studs |
|
|
of the wall to ensure a firm and sturdy |
|
|
hold. Most houses have the wall |
|
|
studs spaced on sixteen inch centers. |
|
|
To ensure a reliable and sturdy instal- lation, please consult a professional installer before mounting the unit to a wall.
STUD | STUD |
16 inches