Models 2E510F, 2E511F, 3E218F, and 3E219F

Dayton Operating Instructions and Parts Manual

Models 2E510F, 2E511F, 3E218F, and 3E219F

General Safety Information

Make certain you read and understand all warnings. Keep these instructions for reference. They are your guide to safe and proper operation of this heater.

Safety information appears through- out these instructions. Pay close attention to them. Below are defini- tions for the safety information listed throughout this manual.

Under this heading, installation, operating,

and maintenance procedures or practices will be found that, if not carefully followed, WILL result in IMMEDIATE serious personal injury or death.

Under this heading, installation, operat-

ing, and maintenance procedures or practices will be found that, if not carefully followed, COULD result in severe personal injury or death.

Under this heading, installation, operat-

ing, and maintenance procedures or practices will be found that, if not carefully followed, COULD result in minor personal injury, product or property damage.

IMPORTANT: Not every possible circum- stance that might involve a hazard can be anticipated. The warnings in this manual and on tags or decals affixed to the unit are therefore not all-inclusive. If a procedure, work method, or operating technique not specifically recommended by Dayton is used, you must make sure it is safe for you and others. You should also ensure that equipment will not be damaged or made unsafe by the operat- ing or maintenance method you choose.

This product contains and/or

generates chemicals known to the State of California to cause cancer or birth defects, or other reproductive harm.

Carbon monoxide poisoning may lead to

death! Some people are more affected by carbon monoxide than others. Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be operating properly, or the areas may not be sufficiently ventilated. Get fresh air at once! Have heater serviced.

Improper use of this heater can cause

serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning.

Make certain you read and understand all warnings. Keep these instructions for reference. They are your guide to safe and proper operation of this heater.

Use only Kerosene, #1/#2 diesel/fuel oil,

JET A or JP-8 fuels to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.

•Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and applicable federal, state, and local regulations regard- ing the safe fueling of heating units.

b)Only the type of fuel specified on the heater's data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel-line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day's supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet from heaters, torches, welding equipment, and similar sources of ignition (excep- tion: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor penetrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accor- dance with the federal, state, or local authority having jurisdiction.

•Never use heater where gasoline, paint thinner, or other highly flammable vapors are present.

•Follow all local ordinances and codes when using heater.

•Use only in well-vented areas. Provide at least three square feet of fresh, outside air for each 100,000 Btu/Hr of rating.

•Use only in places free of flammable vapors or high dust content.

•Use only with the electrical voltage and frequency specified on model plate.

•Use only a three-prong, grounded extension cord.

111166-01A

5S1792 specifications

The Dayton 5S1792 is a high-performance, compact fan designed primarily for industrial applications, known for its efficiency, durability, and versatility. Built by Dayton, a renowned manufacturer of electric motors and associated products, the 5S1792 model stands out in the market due to its thoughtful engineering and innovative features.

One of the main characteristics of the Dayton 5S1792 is its robust construction. The fan's housing is made from high-quality materials that resist corrosion and protect it against the rigors of demanding environments. This durability not only extends the lifespan of the product but also ensures reliable performance over time, making it ideal for various industrial settings, including factories and warehouses.

The Dayton 5S1792 features a powerful motor that provides consistent airflow, crucial for maintaining optimal conditions in workplaces. With a high airflow capability, the fan effectively circulates air, ensuring that spaces remain cool and comfortable, which is vital for worker productivity and equipment efficiency. The fan is also designed to operate quietly, making it suitable for environments where noise levels are a concern.

In terms of technology, the Dayton 5S1792 is engineered with energy efficiency in mind. It employs advanced motor technologies that not only reduce power consumption but also minimize heat generation. This aspect is particularly beneficial for organizations looking to lower their energy costs while maintaining high-performance standards.

The flexibility of the Dayton 5S1792 is another key feature. It is available in various sizes and configurations, allowing users to select the model that best suits their specific needs. Additionally, the fan can be mounted in multiple orientations, making it adaptable to different installation requirements, whether wall-mounted, ceiling-mounted, or on stands.

Maintenance of the Dayton 5S1792 is straightforward, thanks to its user-friendly design. Accessible components facilitate easier cleaning and servicing, which is essential for prolonging the unit's lifespan and ensuring it operates at peak efficiency.

In summary, the Dayton 5S1792 is a standout choice for those seeking a reliable and efficient fan for industrial use. Its robust construction, powerful motor, energy-efficient design, and versatility make it a trusted option for enhancing airflow in various applications. The consideration of maintenance and ease of use further adds to its appeal, establishing it as a valuable investment for any industrial facility.