Desa CPVSA18R, CPVSA24R, CVDA24R, CVDA30R Checking GAS Connections, Hearth PAN Installation

Page 6

6

INSTALLATION

Checking Gas Connections Hearth Kit Installation

INSTALLATION

Continued

CHECKING GAS CONNECTIONS

HEARTH PAN INSTALLATION

WARNING: Test all gas piping and connections for leaks after installing or servicing. Correct all leaks at once.

WARNING: Never use an open flame to check for a leak. Apply a noncorrosive leak detection fluid to all joints. Bubbles forming show a leak. Correct all leaks at once.

Pressure Testing Gas Supply Piping System

Test Pressures In Excess Of 1/2 PSIG (3.5 kPa)

1.Disconnect log set and its individual equipment shutoff valve from gas supply piping system.

2.Cap off open end of gas pipe where equipment shutoff valve was connected.

3.Pressurize supply piping system by either using compressed air or opening main gas valve located on or near gas meter.

4.Check all joints of gas supply piping system. Apply a noncor- rosive leak detection fluid to all joints. Bubbles forming show a leak.

5.Correct all leaks at once.

6.Reconnect log set and equipment shutoff valve to gas supply. Check reconnected fittings for leaks.

Test Pressures Equal To or Less Than 1/2 PSIG (3.5 kPa)

If using propane/LP gas, see Propane/LP Gas Conversion on page 7, before installing hearth pan.

1.Place the burner pan assembly in the center of the fireplace floor. Make sure the front of pan faces forward.

2.Thread the gas supply fitting to the fireplace gas supply pipe. Adjust to most convenient position.

3.Install the gas connector tube to the gas supply adapter. Carefully shape tube and attach to gas inlet fitting (see Figure 6). Be careful not to cause kinks in tube.

4.Test for leaks following instructions under Testing Burner for Leaks, page 8.

5.Retighten and adjust the location of the gas control as necessary. The gas control should be level, with the control rod to the front.

Gas

Connector

Tube

 

O

 

 

F

 

NO

F

Gas Inlet

OT

P

 

 

Gas Control Valve

Inlet Opening

Fitting

Figure 6 - Installing Inlet Fitting and Gas Connector Tube (Valve Cover Removed for Clarity)

1.Close equipment shutoff valve (see Figure 5).

2.Pressurize supply piping system by either using compressed air or opening main gas valve located on or near gas meter.

3.Check all joints from gas meter to equipment shutoff valve (see Figure 5). Apply a noncorrosive leak detection fluid to all joints. Bubbles forming show a leak.

4.Correct all leaks at once.

Equipment Shutoff Valve

Gas Meter

Figure 5 - Checking Gas Joints

For morevisit www..com

901273-01D

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Owners Operation and Installation Manual What to do if YOU Smell GASTable of Contents Safety InformationLocal Codes Product FeatureRemote Ready Safety VALVE/PILOT Product IdentificationVenting Specifications for Installation InstallationFlue Opening Specifications Check GAS TypeInstalling Damper Clamp Connecting to GAS SupplyInstallation Items Needed Hearth PAN Installation Pressure Testing Gas Supply Piping SystemChecking GAS Connections Adjusting Regulator Pressure For Propane/LP Conversion Propane/LP Gas ConversionBurner Inlet Fitting Adding PAN Material Testing Burner for LeaksRemote Control Options GWMS2Installing Grate and Logs Installing Grate Pan Material Not ShownOperating Appliance For Your Safety Read Before LightingIf Using Optional Hand-Held Remote or Wall Switch Lighting InstructionsCuring Logs GWMS2 Wall Mounted Switch OptionalTo Turn OFF GAS to Appliance Optional Remote OperationCleaning Maintenance Replacement PartsInspecting Burners Troubleshooting Observed Problem Possible Cause RemedyFor more Visit www Com Top Gas leak. See Warning statement atIllustrated Parts Breakdown Models VVSA18R, VVSA24R, VVDA18R VVDA24R, and VVDA30RParts List Parts Available not ShownKingston Split Oak Logs Hanover Round Oak Logs Parts List Illustrated Parts BREAK- Down Models FVSA18R, FVSA24R, FVDA18R FVDA24R, and FVDA30RParts Available not Shown Models FSLR18, FSLR24, FDLCR18, FDLCR24, and FDLCR30 Parts List Models CVDA18R, CVDA24R, and CVDA30R KEY Part Number for CVDA18R CVDA24R Models CPVSA18R, and CPVSA24R KEY Part Number for CPVSA18R CPVSA24R Description QTY Accessories Owners Registration Form Postage Required 901273-01D Warranty Information Limited Warranty Vented GAS Logs

CVDA24R, CVDA30R, CPVSA18R, CPVSA24R, CVDA18R specifications

The Desa CVDA18R, CPVSA18R, CPVSA24R, CVDA24R, and CVDA30R are a series of advanced solutions designed to meet various heating and ventilation needs. These models come with a plethora of features, technologies, and characteristics that make them suitable for both residential and commercial applications.

The Desa CVDA18R, a heating powerhouse, boasts an impressive thermal output that ensures rapid heating across medium-sized spaces. It integrates advanced control systems allowing precise temperature regulation for enhanced comfort and energy efficiency. One of its standout technologies is the dual-fuel option, supporting both gas and electric heating, providing versatility depending on availability and preference.

Similarly, the CPVSA18R model stands out with its compact design, ideal for tight spaces without compromising on efficiency. It features a high-efficiency combustion system that maximizes heat production while minimizing fuel consumption. This model also includes an intelligent self-diagnostic system that monitors performance and alerts users to any potential issues, ensuring reliable operation.

The CPVSA24R takes things further with an increased heating capacity suitable for larger spaces. It combines sustainable technologies with user-friendly interfaces, allowing homeowners and businesses to manage their heating systems easily. Features such as programmable timers and remote access via smart devices add convenience in today's tech-driven world.

Next in the lineup, the CVDA24R focuses on improved air quality, equipped with advanced filtration systems that not only heat but also purify the air in living spaces. This model is particularly beneficial for those with allergies or respiratory concerns, ensuring a healthier indoor environment.

Lastly, the CVDA30R brings robust performance to the table, designed for expansive areas that demand high heating capacity. It incorporates sound-dampening technologies, making it one of the quietest units in its class. With a focus on energy efficiency, the CVDA30R meets or exceeds energy performance standards, helping users save on utility bills while contributing to a greener planet.

Overall, the Desa CVDA and CPVSA series exemplify cutting-edge heating technologies, offering a blend of efficiency, reliability, and user comfort. Each model caters to specific needs, ensuring that customers find the right fit for their unique heating challenges.
Top Page Image Contents