Desa CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, 24", 30 installation manual Floor Clearances

Page 11

INSTALLATION

Continued

NOTICE: If your installation does not meet the minimum clear- ances shown, you must do one of the following:

•operate the logs only with the flue damper open

•raise the mantel to an accept- able height

•remove the mantel

Hearth

Combustible Material

5"

Min.

Figure 9 - Minimum Fireplace Clearances

Above Combustible Flooring

INSTALLING DAMPER CLAMP ACCESSORY FOR VENTED OPERATION

12"

10"

8"

6"

2 1/2"

Minimum

Noncombustible

Material8"

Min.

Mantel Shelf

Underside

of Mantel

Shelf

All minimum distances are in inches

 

 

 

 

Log Set

12"

15"

18"

20"

 

All

 

Models

 

 

 

 

 

Note: When used as a vented heater, appliance must be installed only in a solid-fuel burning fireplace with a working flue and constructed of noncombustible material.

If your heater is a manually-controlled model, you may use this heater as a vented product. There are three reasons for operating your heater in the vented mode.

1.

The fireplace does not meet the clearance

Hood

(GA6050, GA6052 and GA6053)

Distances to Underside of Mantel

Top of

Fireplace

Opening

 

to combustibles requirements for vent-free

 

operation.

2.

State or local codes do not permit vent-free

 

operation.

3.

You prefer vented operation.

Figure 7 - Minimum Mantel Clearances

When Using Hood

FLOOR CLEARANCES

A.If installing appliance on the floor level, you must maintain the minimum distance of 14" to combustibles (see Figure 8).

B.If combustible materials are less than 14" to the fireplace, you must install appliance at least 5" above the combustible flooring (see Figure 9).

If reasons number 1 or 2 above apply to you, you must permanently open chimney flue damper. You must install the damper clamp accessory (to order, see Accessories, page 38). This will insure vented operation (see Figure 10). The damper clamp will keep damper open. Installation instructions are included with clamp accessory.

Damper

Clamp

Damper

Damper

Clamp

 

 

Damper

Damper

 

Combustible

 

 

14"

Material

 

 

 

 

 

Min.

 

 

 

 

Noncombustible

Masonry

Manufactured

 

Fireplace

Fireplace

 

Material

 

 

 

Figure 8 - Minimum Fireplace Clearances

Figure 10 - Attaching Damper Clamp

if Installed at Floor Level

 

 

113097-01C

www.desatech.com

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Patent Pending What to do if YOU Smell GASTable of Contents Safety Information Est edition of The National Fuel Gas Code, Ansi Z223.1/NFPA Local CodesUnpacking Product FeaturesProduct Identification Determining FRESH-AIR Flow for Heater Location AIR for Combustion VentilationProviding Adequate Ventilation Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside Building Check GAS Type InstallationDepth Side WallMinimum Firebox LogMantel Clearances Accessories,Floor Clearances Installing Damper Clamp Accessory for Vented OperationArea of Various Standard Round Flues Installing Heater Base AssemblyInstallation Items Needed Chimney Minimum PermanentAttaching Base Assembly to Fireplace Floor Dual Burner Model Connecting to GAS SupplyAdjustment. Checking GAS Connections Test Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Test Pressures In Excess Of 1/2 Psig 3.5 kPaInstalling Front Log #1 CCL3930PTB/NTB Shown Installing LogsInstalling Crossover Log #4 CCL3930PTB/NTB Shown Installing Front Log Lighting Instructions Operating HeaterShutting Off Heater Manual Lighting ProcedureVariable Control Operation To Turn OFF GAS To ApplianceOperating Heater Control Knob and Ignitor Thermostat Control OperationInspecting Burners Cleaning MaintenanceLogs Service HintsTechnical Service When Gas Pressure Is Too LowObserved Problem Possible Cause Remedy TroubleshootingOr replace burner orifice Statement above Gas leak. See WarningFor Masonry and FACTORY- Built Metal Fireplace Optional Positioning Thermostat Sensing BulbSingle Burner Seasonal OAK Models Dual Burner Biltmore Split OAK ModelsIllustrated Parts Breakdown Variable MANUALLY-CONTROLLED Biltmore Split OAK Models Parts ListIllustrated Parts Breakdown THERMOSTATICALLY-CONTROLLED Biltmore Split OAK Models Peg positions vary according to model 111340-02 111340-02 111340-01 Front Log #1 3A 3B Variable MANUALLY-CONTROLLED Seasonal OAK Models Accessories Replacement PartsParts Central Limited Warranty Comfort Glow VENT-FREE GAS LOG Heaters Warranty InformationKeep this Warranty

CRL2718PA/NA, CRL3124PA/NA, CCL3018PA/NA, CCL3924PA/NA, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, 24", 30 specifications

Desa gas fireplaces are known for their innovative designs and advanced technologies, making them a popular choice among homeowners seeking both aesthetics and performance. Among the range of products, the models Desa 24", 30, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, CRL2718PA/NA, CRL3124PA/NA, and CCL3018PA/NA stand out due to their unique characteristics and features that enhance the home ambiance while providing efficient heating solutions.

One of the key features of these Desa models is their variable size offerings. With options like the 24" and 30" units, homeowners can choose the perfect fit for their space, whether it's a cozy corner or a focal point in the living room. The variety of sizes allows for flexibility in design, ensuring that each fireplace integrates seamlessly with the surrounding decor.

Moreover, these models are equipped with advanced heating technologies that improve energy efficiency. Many units feature dual fuel capabilities, allowing users to switch between natural gas and propane, which is ideal for adapting to different energy sources and preferences. This flexibility is coupled with a powerful output, providing substantial warmth while also being environmentally friendly.

The aesthetic appeal of Desa fireplaces cannot be overlooked. Models like CCL3018PTA/NTA and CCL3924PTA/NTA come with realistic flame effects that replicate a traditional wood-burning fireplace's ambiance without the hassle of keeping wood stocked. The captivating flame patterns and ember beds create a warm and inviting atmosphere, enhancing any living space.

In terms of safety and convenience, Desa fireplaces are designed with several features that ensure hassle-free operation. Most models include electronic ignition systems, allowing for easy start-up without the need for matchsticks or lighters. Additionally, many units come equipped with remote controls, enabling users to adjust settings such as flame height and heat output from the comfort of their seats.

The construction of Desa fireplaces also emphasizes durability and quality. Built with robust materials and carefully engineered components, these fireplaces are designed to withstand the test of time while maintaining high-performance standards.

Overall, the Desa lineup, featuring models such as CCL3930PTB/NTB, CRL2718PA/NA, and CRL3124PA/NA, brings together a perfect blend of efficiency, aesthetic appeal, and modern technology. The thoughtful design, user-friendly features, and versatile options make them a fantastic choice for anyone looking to upgrade their home heating solution while adding a touch of elegance to their interiors. With a Desa fireplace, homeowners not only invest in a reliable source of heat but also enrich their living environment with style and comfort.
Top Page Image Contents