Desa 24", 30, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB installation manual Operating Heater

Page 21

OPERATING HEATER

Continued

THERMOSTAT-CONTROLLED

MODELS

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result causing property damage, per- sonal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighborʼs phone. Follow the gas supplierʼs instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, donʼt try to repair it, call a qualified service tech- nician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING

INSTRUCTIONS

WARNING

•If fireplace has glass doors, never operate this heater with glass doors closed. If you op- erate heater with doors closed, heat buildup inside fireplace will cause glass to burst. Make sure there are no obstructions across openings of fireplace.

•You must operate this heater with a fireplace screen in place. Make sure fireplace screen is closed before run- ning heater.

NOTICE: During initial operation of new heater, burning logs will give off a paper-burning smell. Orange flame will also be pres- ent. Open damper or window to vent smell. This will only last a few hours.

Note: Home owners generally prefer to op- erate their heater with the chimney damper closed. This will put all the heat into the room. However, there may be times you will desire the full flames of the HI heat setting but will find the heat output excessive. You can open the chimney damper (if you have one) fully or partially to release some of the heat.

WARNING: Damper handle will be hot if heater has been running.

1.STOP! Read the safety information, column 1.

2.Make sure equipment shutoff valve is fully open.

3.Turn control knob clockwise to the OFF position.

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information, column 1. If you donʼt smell gas, go to the next step.

113097-01C

www.desatech.com

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Patent Pending What to do if YOU Smell GASTable of Contents Safety Information Est edition of The National Fuel Gas Code, Ansi Z223.1/NFPA Local CodesProduct Features Product IdentificationUnpacking AIR for Combustion Ventilation Providing Adequate VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Check GAS Type InstallationMinimum Firebox Side WallLog DepthMantel Clearances Accessories,Floor Clearances Installing Damper Clamp Accessory for Vented OperationInstallation Items Needed Installing Heater Base AssemblyChimney Minimum Permanent Area of Various Standard Round FluesAttaching Base Assembly to Fireplace Floor Dual Burner Model Connecting to GAS SupplyAdjustment. Checking GAS Connections Test Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Test Pressures In Excess Of 1/2 Psig 3.5 kPaInstalling Front Log #1 CCL3930PTB/NTB Shown Installing LogsInstalling Crossover Log #4 CCL3930PTB/NTB Shown Installing Front Log Lighting Instructions Operating HeaterVariable Control Operation Manual Lighting ProcedureTo Turn OFF GAS To Appliance Shutting Off HeaterOperating Heater Control Knob and Ignitor Thermostat Control OperationInspecting Burners Cleaning MaintenanceTechnical Service Service HintsWhen Gas Pressure Is Too Low LogsObserved Problem Possible Cause Remedy TroubleshootingOr replace burner orifice Statement above Gas leak. See WarningFor Masonry and FACTORY- Built Metal Fireplace Optional Positioning Thermostat Sensing BulbSingle Burner Seasonal OAK Models Dual Burner Biltmore Split OAK ModelsIllustrated Parts Breakdown Variable MANUALLY-CONTROLLED Biltmore Split OAK Models Parts ListIllustrated Parts Breakdown THERMOSTATICALLY-CONTROLLED Biltmore Split OAK Models Peg positions vary according to model 111340-02 111340-02 111340-01 Front Log #1 3A 3B Variable MANUALLY-CONTROLLED Seasonal OAK Models Accessories Replacement PartsParts Central Warranty Information Keep this WarrantyLimited Warranty Comfort Glow VENT-FREE GAS LOG Heaters

CRL2718PA/NA, CRL3124PA/NA, CCL3018PA/NA, CCL3924PA/NA, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, 24", 30 specifications

Desa gas fireplaces are known for their innovative designs and advanced technologies, making them a popular choice among homeowners seeking both aesthetics and performance. Among the range of products, the models Desa 24", 30, CCL3018PTA/NTA, CCL3924PTA/NTA, CCL3930PTB/NTB, CRL2718PA/NA, CRL3124PA/NA, and CCL3018PA/NA stand out due to their unique characteristics and features that enhance the home ambiance while providing efficient heating solutions.

One of the key features of these Desa models is their variable size offerings. With options like the 24" and 30" units, homeowners can choose the perfect fit for their space, whether it's a cozy corner or a focal point in the living room. The variety of sizes allows for flexibility in design, ensuring that each fireplace integrates seamlessly with the surrounding decor.

Moreover, these models are equipped with advanced heating technologies that improve energy efficiency. Many units feature dual fuel capabilities, allowing users to switch between natural gas and propane, which is ideal for adapting to different energy sources and preferences. This flexibility is coupled with a powerful output, providing substantial warmth while also being environmentally friendly.

The aesthetic appeal of Desa fireplaces cannot be overlooked. Models like CCL3018PTA/NTA and CCL3924PTA/NTA come with realistic flame effects that replicate a traditional wood-burning fireplace's ambiance without the hassle of keeping wood stocked. The captivating flame patterns and ember beds create a warm and inviting atmosphere, enhancing any living space.

In terms of safety and convenience, Desa fireplaces are designed with several features that ensure hassle-free operation. Most models include electronic ignition systems, allowing for easy start-up without the need for matchsticks or lighters. Additionally, many units come equipped with remote controls, enabling users to adjust settings such as flame height and heat output from the comfort of their seats.

The construction of Desa fireplaces also emphasizes durability and quality. Built with robust materials and carefully engineered components, these fireplaces are designed to withstand the test of time while maintaining high-performance standards.

Overall, the Desa lineup, featuring models such as CCL3930PTB/NTB, CRL2718PA/NA, and CRL3124PA/NA, brings together a perfect blend of efficiency, aesthetic appeal, and modern technology. The thoughtful design, user-friendly features, and versatile options make them a fantastic choice for anyone looking to upgrade their home heating solution while adding a touch of elegance to their interiors. With a Desa fireplace, homeowners not only invest in a reliable source of heat but also enrich their living environment with style and comfort.
Top Page Image Contents