24571.1 en.qxd
Set/Change code
The Child lock feature (see TV, Features, p. 26) allows you to lock channels to prevent others from watching certain programmes.To watch locked channels, a
&Select Set/Change code.
éIf no code exists yet, the menu item is set to Set code.
If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen.
Important:You have forgotten your code!
&Select Change code in the General menu and press OK.
éPress the cursor right and enter the overriding code
“Press the cursor again and enter a new personal
English
Source
This menu allows you to indicate the peripheral you connected to one of the external inputs.
Source
Setup 
EXT1
EXT2
EXT3
DVI-I
Side
Centre input
Centre in volume
&Press the cursor right to enter the list of types of peripherals attached to the selected input.
éSelect the peripheral device with the cursor up/down.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 4, and when you press the v key on the remote control.
Centre input - Centre in volume
When you have connected a surround receiver to the TV, see p. 32, the loudspeakers of the TV can act as centre speaker, making a separate centre speaker unnecessary.
Select Centre input On.
When having selected On, you can adjust the Centre in volume with the cursor left/right to correct volume level differences of the external audio receiver and speakers.
Decoder
If a decoder or a descrambler is connected, see p. 30, you can define one or more programme numbers as decoder programme numbers.
Decoder
Setup 
Programme
Status
&Select Decoder with the cursor right.
éSelect Programme.
“Select the programme number under which you have stored the programme coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None or EXT1.
•Select None if you do not want the selected programme number being activated as a decoder programme number.
21