24571.1 en.qxd
Smart picture
Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings.
Personal refers to the personal preference settings of picture in the picture menu.
Note: This Philips TV has been set at the factory to look best in bright store environments which use fluorescent lighting. As your home will likely not be as well lit as a store, we recommend you that you cycle through the various Smart picture modes to find the one that best suits your own viewing conditions. Most consumers will find that Natural is the correct choice.
Digital options
Pixel Plus 2 is the most ideal setting, doubles the horizontal resolution and increases the number of lines by 33%.
You may consider to select Movie Plus in case a halo effect should disturb you. Dependent on your own preference, select Progressive scan.
Dynamic contrast
Sets the level at which the TV automatically enhances the details in dark, middle and light areas of the picture.
DNR
This sets the level at which noise is measured and reduced in the picture.
Colour enhancement
This makes the colours more vivid and improves the resolution of details in bright colours.
Hue
This compensates for the colour variations in NTSC encoded transmissions.
Picture format
This will adjust the size of the picture dependent on the broadcast format and your preferred setting.
See also Use of the remote control, Picture format, p. 4.
English
Active Control
The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.The ambient light sensor adjusts the settings according to the viewing conditions in the room (only when having selected the Active control value Maximum).
&Press the h key on the remote control. Note: Switch off all menus on screen.
éThe Active Control menu appears.
“Press the cursor up/down to select the Active Control values Off, Minimum, Medium or Maximum.
The picture settings are being optimised continuously and automatically which is displayed by bars.Those menu items can not be selected.
‘Press the cursor right to select Smart Picture.
(Press the cursor up/down to select one of the predefined picture settings.
§Press the cursor right to select Active Display.
èPress the cursor up/down to select Show bars, Pixel Plus 2, Digital Natural Motion or Off. When you select Pixel Plus 2 or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on.
!Press the h key again to switch off the Active Control menu.
23