Philips 32PF9967D/10 Equipment to connect to the side connections, Connect Peripheral Equipment

24571.1 en.qxd 31-08-2005 11:59 Pagina 29

Equipment to connect to the side connections

2

1

3

AUDIO

VIDEO S•VIDEO

Camera, Camcorder or Game

&Connect your camera, camcorder or Game as shown.

éConnect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect

AUDIO R 3.

S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEOinput 1 and AUDIO inputs 3.

Do not connect cable 1 and 2 at the same time. This may cause picture distortion !

Headphone

&Insert the plug into the headphone socket L as shown.

éPress ¬ on the remote control to switch off the internal loudspeakers of the TV.

The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack.

In the Sound menu select Headphone volume to adjust the headphone volume.

English

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you how to connect them.

Note:

EXT1 can handle CVBS, RGB and Audio L/R;

EXT2 CVBS,Y/C, RGB and Audio L/R;

EXT3 CVBS and Audio L/R;

DVI can handle VGA, SVGA, XGA and 480p, 576p, 720p, 1080i and 1152i

Side can handle CVBS, S-VIDEO and Audio L/R.

It is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a better picture quality.

Note: If your recorder is provided with the EasyLink function, it should be connected to EXT2 to benefit from the EasyLink functionality.

ANTENNA	EXT2	EXT1	CENTRE	AUDIO	AUDIO	DVI
			IN	OUT
						EXT3
			R
						R
			L			L
			SUBW

29