AquaStar 38B LP specifications For Your Safety, What to do if YOU Smell GAS, Table of Contents

Page 1

INSTALLATION AND OPERATING INSTRUCTIONS FOR AUTOMATIC INSTANTANEOUS TYPE WATER HEATERS FOR USE WITH NATURAL AND LIQUEFIED PETROLEUM GAS

MODEL 38B LP and NG (Non Modulating)

Suitable for water (potable) heating and space heating

Intended for low flow domestic hot water applications with steady cold water inlet temperatures

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable, combustible or corrosive vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance.

- Do not touch any electrical switch; do not use any phone in your building.

- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

- If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier.

TABLE OF CONTENTS

6 720 605 293 PT 862 (12.98)

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information consult a qualified installer, service agency or the gas supplier. Upon completion of the installation, these instructions should be handed to the user of the appliance for future reference.

Specifications

Page 2

Rules for safe operation

Page 4

Locating the Heater

Page 4

Combustion Air Requirements

Page 4

Mounting the Heater

Page 5

Venting the Heater

Page 5

Gas Connections

Page 6

Water Connections

Page 6

Safety before lighting the pilot

Page 7

Lighting instructions

Page 8

Setting water temperature

Page 8

Maintenance & Service

Page 9

Trouble Shooting

Page 10

Diagram of AquaStar

Page 13

Components and Parts List

Page 14

Image 1
Contents Table of Contents For Your SafetyWhat to do if YOU Smell GAS AquaStar 38B LP and 38B NG Specifications FeaturesUnpacking the Aquastar Heater Open loop potable water and combination space heating system General Rules to Follow For Safe Operation Proper Location for Installing Your HeaterCombustion AIR Requirement Could FreezeClearances Mounting InstallationVenting Water Connections Maximum Inlet GAS Flow Pressure SettingAltitude Natural Gas Liquid Propane Above 4.500 ft consult your local gas supplierOperating Instructions For Your Safety Read Before Lighting the PilotLighting Instructions Setting the Water TemperatureTo Turn OFF GAS to Appliance Characteristic Pilot Flame Maintenance and ServicePilot Lights but Flame Goes OUT When Button is Released Trouble ShootingWater is TOO HOT Burners do not Ignite When HOT Water is Turned onWater is not HOT Enough Unbalanced pressure in waterlines HOT Water Temperature FluctuatesInsufficient gas pressure Diagram of AquaStar 38 B Interior Components Diagram and Parts List LPG Interior Components Diagram Parts List 38BControlled Energy Corp Installation Checklist

38B LP, 38B NG specifications

The AquaStar 38B LP and AquaStar 38B NG are cutting-edge water heating solutions designed for efficiency and performance, ideal for both residential and commercial applications. These models boast a sleek, compact design, making them suitable for installation in tight spaces while still delivering robust heating capabilities.

One of the key features of the AquaStar 38B LP and 38B NG is their advanced energy efficiency. With an impressive Energy Factor (EF) rating, these units utilize state-of-the-art heat exchange technology to maximize heat transfer and minimize energy consumption. This translates to reduced utility bills and a smaller carbon footprint, making them eco-friendly options in today’s sustainability-focused market.

The AquaStar models are available in two fuel types: LP (liquefied propane) and NG (natural gas). This dual-fuel flexibility allows users to select the ideal option based on availability and cost, ensuring optimal performance tailored to individual needs. The integration of high-quality burners further enhances the efficiency and reliability of these systems, ensuring quick recovery times and consistent hot water availability.

One notable characteristic of the AquaStar 38B units is their ability to provide continuous hot water. This makes them an excellent choice for households with high demand or commercial establishments like restaurants and hotels, where hot water is required throughout the day.

Moreover, the AquaStar 38B models are equipped with innovative safety features to enhance user protection. The built-in temperature control mechanism allows users to set their preferred water temperature, while also incorporating anti-scald technology to prevent overheating.

In terms of maintenance, the AquaStar 38B units stand out with their user-friendly design. Routine maintenance is straightforward, and the models feature easily accessible components for servicing, which contributes to their longevity and reliability.

In conclusion, the AquaStar 38B LP and 38B NG represent a fusion of efficiency, safety, and advanced technology. With their energy-saving capabilities, versatile fuel options, and robust design, these water heaters are a worthwhile investment for anyone seeking reliable and efficient hot water solutions.