Bradford-White Corp Commercial Electric Water Heaters Temperature Adjustment, Maximum temperature

Page 14

D A N G E R

TEMPERATURE ADJUSTMENT

HOT!

BURN

FIG. 18

•Water temperature over 125˚F can cause severe burns instantly or death from scalds.

•Children, disabled and elderly are at highest risk of being scalded.

•See instruction manual before setting temperature at heating appliance.

•If this appliance is used to produce water that could scald if too hot, such as domestic hot water use, adjust the outlet control (limit) or use temperature limiting valves to obtain a maximum water temperature of 125˚F. SEE MANUAL.

1.

Turn “OFF” the electrical power to the water

 

heater. If the power disconnect point is out of

 

sight, lock it in the open (“OFF”) position

 

and tag to prevent unexpected application

 

of power.

 

2.

Open the water heater’s electrical access panel.

3.

Adjust each immersion thermostat to

the

 

desired temperature setting by turning

the

WARNING:

WARNING: SHOULD OVERHEATING OCCUR OR THE TEMPERATURE CONTROLS FAILTO SHUT OFF,TURN OFF OR DISCONNECT THE ELECTRICAL SUPPLY AT THE MAIN POWER DISCONNECT EXTERNAL TO THE APPLIANCE.

DANGER:

•Water temperature over 125˚ F (51.7°C) can cause severe burns instantly or death from scalding.

•Children, disabled and elderly are at highest risk of being scalded.

•See instruction manual before setting temperature at heating appliance.

•Feel water before bathing or showering.

•If this appliance is used to produce water that could scald if too hot, such as domestic hot water use, adjust the outlet control (limit) or use temperature limiting valves to obtain a maximum water temperature of 125˚ F (51.7° C).

Always close the electrical control panel door after making a temperature adjustment. Turn on electricity.

 

adjusting knob. Each thermostat will be

 

factory pre-set to approximately 125° F

 

(51.7° C) or less as shipped.

4.

Close the water heater’s electrical access panel.

5.

Turn “ON” the electrical power to the

 

water heater.

CAUTION:

The maximum temperature

 

 

setpoint that should be set for the Immersion Thermostats or programmed into the Electronic Temperature Control Sequencer is 190° F ( 88° C)

ELECTRONIC TEMPERATURE

CONTROL SEQUENCER

FIG. 19 Electronic Temperature Control with Digital Display

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Special Instructions To Owner WarrantyCHP-I&S-01 Checking EquipmentContents Front View Vertical Round Models Codes Installation Procedure Location of UnitOwner Warning ApprovalsPage Clearances from Combustible Construction Table a Clearances from Combustible ConstructionMounting Water ConnectionsThermal Expansion of Water Storage TankRelief Valve Do not plug or cap the relief valveCathodic Protection Electrical ConnectionsStandard Equipment Jacket AssemblyNever turn on the electric Optional Equipment Components and Controls Terminal BlockControl Circuit Transformer Fuse and Flue BlocksContactors Immersion Thermostats Temperature RegulationWater Temperature Settings Hotter water increasesElectronic Temperature Control Sequencer Temperature AdjustmentMaximum temperature Operating Humidity 5 95% RH SpecificationsOperating Ambient Temperature -30 to 125 F Select and Enter Keys simultaneouslyProgramming Worksheet Setup of the Temperature ControllerDisplay When power is initially ProgrammingHigh Water Temperature Limit Control Disconnect the main power Immersion Heating ElementLOW Water Pressure Switch High Water Pressure SwitchTime Clock Optional Filling the Water Heater START-UP ProcedureLeft in the open position when the water heater is in use START-UP Initial START-UP ChecksTemperature and Pressure Relief Valve Operation Shutdown ProcedureMaintenance Draining the Water HeaterSediment Removal Water ChemistryFlushing the Storage Tank Sediment and Lime Scale RemovalGaskets are available from your distributor Trouble Shooting If YOU Cannot Identify or Correct the Source Malfunction

9kW, 900kW, Commercial Electric Water Heaters specifications

Bradford-White Corporation has established itself as a leader in the water heating industry, providing a diverse range of innovative and efficient water heating solutions. Among its prominent offerings are the 900kW and 9kW Commercial Electric Water Heaters. These models have been designed for a variety of commercial applications, ensuring reliability, performance, and energy efficiency.

The 900kW Commercial Electric Water Heater is specifically engineered for large-scale applications that require significant hot water outputs. This powerhouse can effectively support high-demand environments such as hotels, restaurants, and industrial facilities. One of its standout features is its high-efficiency design, which maximizes hot water production while minimizing operational costs. The heater employs advanced technology to increase thermal efficiency, which in turn reduces energy consumption and lowers utility bills.

This model also features a robust heating element configuration that ensures rapid recovery rates. With multiple heating elements strategically placed within the tank, the 900kW unit can maintain consistent water temperatures even during peak usage hours. Additionally, it is equipped with advanced controls that facilitate precise temperature management, further enhancing user convenience and system performance.

On the other side, the 9kW Commercial Electric Water Heater is ideal for smaller businesses or applications where space and hot water demand are more constrained. This model is compact yet powerful, capable of efficiently delivering hot water for various tasks such as handwashing, cleaning, and food preparation. Its compact design allows for flexible installation options, making it suitable for tight spaces without compromising performance.

Both models incorporate corrosion-resistant tank materials and durable insulation to ensure longevity and reliable operation over time. The integrated safety features, including high-temperature limit switches and automatic shut-off mechanisms, provide users with peace of mind regarding operational safety.

Furthermore, Bradford-White prioritizes sustainability in its product lines. Both the 900kW and 9kW Commercial Electric Water Heaters comply with stringent efficiency regulations, making them eco-friendly options for businesses looking to reduce their carbon footprint.

In summary, Bradford-White’s 900kW and 9kW Commercial Electric Water Heaters represent the perfect fusion of performance, efficiency, and reliability, catering to diverse commercial needs while promoting sustainability and cost-effectiveness in water heating solutions.
Top Page Image Contents