PREPARATION
LENS INSTALLATION
Before setting up the projector, install the Projection Lens on the Projector.
1.Before installation, check where the projector is used and prepare suitable lens. For specifications of the Projection Lens, refer to the manual separately attached or contact the sales dealer where you purchased the projector.
2.For installation, refer to the installation manual supplied to the Projector.
When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface. And be careful not to hold or subject the lens to strong forces. It may damage the lens, cabinet, or mechanical parts.
POSITIONING THE PROJECTOR
This projector is designed to project on a flat projection | SCREEN | |
surface. | ||
| ||
ROOM LIGHT |
| |
The brightness in the room has a great influence on |
| |
the picture quality. It is recommended to limit |
| |
ambient lighting in order to provide the best image. |
|
VENTILATION
This projector is equipped with cooling fan to protect it from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover the vents with papers or other materials.
● Keep the rear grill at least 3 feet (1 m) away from any object.
●Make sure that there are no objects under the projector. An object under the projector may prevent the projector from taking the cooling air through the bottom vent.
|
|
|
|
AIR INTAKE VENT |
|
| EXHAUST VENT |
| |||
(BOTTOM SIDE) |
|
| (REAR SIDE) |
|
|
|
|
LENS SHIFT ADJUSTMENT
The projection lens can be moved up, down, left and right with the
Use the LENS SHIFT button and the POINT UP/DOWN button to move the image up or down.
Use the LENS SHIFT button and the POINT LEFT/RIGHT button to move the image left or right.
MOVED UP OR DOWN | MOVED LEFT OR RIGHT |
|
9