VIDEO MODE

PICTURE IMAGE ADJUSTMENT

1

 

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT buttons to select IMAGE

 

 

and press the SELECT button. Another dialog box PICTURE

 

 

 

 

IMAGE ADJUSTMENT Menu will appear.

2

 

 

 

Press the POINT DOWN button and a red-arrow icon will

 

appear. Move the arrow to the function that you want to select

and then press SELECT button.

Standard

Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button.

Cinema

Picture level adjusted for the picture with fine tone.

Custom

Picture level adjusted manually in the custom setting dialog box.

When selecting “▼” the custom setting dialog box will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN button, and adjust each value or change the setting On or Off by pressing the SELECT button to match with the image.

Color

Point to ▼ button to lighten the image, and select ▲ to deepen the image. (From 0 to 63.)

Tint

Point to ▼ button to increase purple, and select ▲ to increase green. (From 0 to 63.)

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Point to ▼ to lighten the color and select ▲ to deepen the color. (From 0 to 63.)

Contrast

Point to ▼ button to decrease contrast, and select ▲ to increase contrast. (From 0 to 63.)

Brightness

Point to ▼ button to darken the image, and select ▲ to brighten the image. (From 0 to 63.)

Sharpness

Point to ▼ button to soften the image, and select ▲ to sharpen the image. (From 0 to 31.)

Gamma

Point to ▼ or ▲ to obtain better balance of contrast. (From 0 to 16.)

Noise reduction

Set “On” to reduce the noise (rough parts) of the image.

Progressive

Set “On” to provide progressive scan mode.

Each of the keys operates as follow.

Reset Recalls the data previously adjusted.

Stored Stores the data in the memory.

Quit

 

 

 

Closes the PICTURE IMAGE ADJUSTMENT Menu.

Move the arrow to the item and press the SELECT button.

The level being selected.

Press the SELECT button at “▼” to adjust the picture level manually.

Move the arrow to ▲ or ▼ and press SELECT button.

 

Press the SELECT

Closes the PICTURE IMAGE

button to set the

function “On” or “Off”.

ADJUSTMENT Menu.

 

NOTE :

The Noise Reduction cannot be operated when the video signal types and systems as follow.

●Composite video signal (SECAM, NTSC4.43, PAL-M and PAL-N systems).

●Y/C separate video and S-video signal (SECAM, PAL-M and PAL-N systems).

●Component video signal.

The Progressive cannot be operated when “480p”, “575p” or “720p” is selected on the SYSTEM MENU (P36).

37