Proxima ASA PROAV9350 manual Setting Menu

SETTING

SETTING MENU

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	SETTING and press the SELECT button. Another dialog box
	SETTING Menu will appear.
2	Press the POINT DOWN button and a red-arrow icon will
	appear. Move the arrow to the item that you want to set, and

then press the SELECT button to set it (For example "On" or "Off").

Blue back

When this function is “On” this projector will produce a blue image instead of the video noise on the screen when the input source is unplugged or turned off.

Display

This function decides whether to display the On-Screen Displays.

On1 ···shows all the On-Screen Displays.

On2 ···shows the On-Screen Displays except the Preparation Display (Our Logo).

Off ····sets the On-Screen Displays disappeared except;

●ON SCREEN MENU

●“Power off?” message

●P-TIMER

Ceiling

When this function is “On” the top / bottom and the left / right reversed picture is provided to project the image from a ceiling mounted projector.

Rear

When this function is “On” the left / right reversed picture is provided to project the image to a rear projection screen.

Split wipe

Turn this function “On” in the SETTING menu. The picture will change into next one by sliding black image side ways like drawing the black curtains when the input source is turned into another one.

Power management

Ceiling function

Rear function

Set the Pointer to the item and press the SELECT button.

This function turns the Projection Lamp off when the projector detects signal interruption and the projector is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn the Projection Lamp off when the input signal is interrupted and the projector is not operated over 5 minutes. This function operates as follows;

1.When the signal is interrupted, “No signal” and the counting down (5 minutes) display appears.

2.When the Projection Lamp turned off, the READY indicator turns off.

3.After 90 seconds, the READY indicator flashes and the Lamp can be turned on again (Power Management mode).

In this Power Management mode, the Projection Lamp is automatically turned on when the input signal connected or the projector is operated with any button on the Side Control or the Remote Control.

Time left until Lamp off.

39