COMPUTER MODE

PC ADJUSTMENT

This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector. If this happens, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has a PC ADJUSTMENT function to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 8 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

NOTE: This PC ADJUSTMENT function cannot be operated when the input signal is digital from the DVI terminal or “RGB” is selected on the SYSTEM MENU (P28 and 29).

1

 

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT RIGHT/LEFT button to select PC

 

 

ADJUST and press the SELECT button. Another dialog box

 

 

 

 

“Where to reserve” Menu will appear.

 

 

 

 

 

 

2

 

In this dialog box, you can store the parameter into the area from

 

“Mode 1” to “Mode 8.” When memorizing the new computer

 

 

parameter, select the Mode with the message “Free” by pressing

 

 

 

 

the POINT UP/DOWN button and the SELECT button. To

 

 

change the parameters of the Mode previously set, select the

 

 

Mode with “Stored.”

 

 

 

 

 

 

3

 

When the Mode is selected, Parameter adjustment dialog box

 

appears. Move the arrow to the item that you want to change by

 

 

pressing the POINT UP/DOWN button, and adjust each item by

 

 

 

 

pressing the SELECT button to match with your computer.

 

 

 

 

 

 

4

 

Move the arrow to “Stored” and press the SELECT button. The

 

parameter is memorized in the selected Mode.

 

 

 

5

 

To activate the Mode manually adjusted in this PC

 

ADJUSTMENT Menu, select the Mode at the SYSTEM SELECT

Menu. (Refer to page 28.)

This Mode has parameters being stored.

The Vacant Mode.

Manual set Computer

Mode (1 to 8).

Close the PC ADJUSTMENT Menu.

Move the arrow to ▲ or

▼and press SELECT button.

30