COMPUTER MODE
NORMAL FUNCTION
The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Side Control or on the Remote Control Unit). The “Standard” display will be displayed on the screen for a few seconds.
Standard
PICTURE POSITION ADJUSTMENTThe position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT.
1 |
| Press the MENU button and the | ||||||||
| appear. Press the POINT LEFT/RIGHT buttons to select | |||||||||
|
| POSITION and press the SELECT button. The PICTURE | ||||||||
|
| |||||||||
|
| POSITION dialog box will appear. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
| Select the arrow to the direction (described as |
| , |
| , |
| or |
| ) |
|
|
|
|
| ||||||
|
|
|
|
| ||||||
|
| that you want to adjust by pressing the POINT UP/DOWN/ | ||||||||
LEFT/RIGHT buttons, and then press the SELECT button.
Each of the keys operates as follow.
Reset 
Recalls the setting data previously set.
Stored 
Stores the setting data in the memory.
Quit |
|
|
| Closes the PICTURE POSITION Menu. |
Select the arrow to the direction (described as 
, 
, 
or 
),and then press the SELECT button.
AUTO IMAGE FUNCTION
The AUTO IMAGE function cannot be operated when the input signal is digital from DVI terminal or "RGB", "480p", "575p", "HDTV720p", "HDTV1035i" or "HDTV1080i" is selected on the SYSTEM SELECT menu.
Press the AUTO IMAGE button on the Side Control or on the Remote Control Unit to automatically adjust Fine sync., Total dots and Screen position for most computers. It will take about 10 seconds.
NOTE: Some computers may not be fully adjusted with the "Auto Image Function". In that case, use the "Picture Image" and/or "Picture Position" adjustments (P32, 33) to make
33