Kodak A-61092 manual Adjusting the exit hopper side guides and end stop

Adjusting the exit hopper side guides and end stop

The exit hopper side guides and end stop must be adjusted so documents are stacked properly after processing.

1.Adjust the side guides on the exit hopper to match the adjustment of the side guides on the feed shelf.

			Side
	Exit hopper		guides
		label	(arrows
			depict correct
			placement of
			side guides)
End
stop

Exit hopper

2.Adjust the end stop of the exit hopper by determining the longest document to be processed. Slide the end stop until the arrows point to where the length of the longest document is shown on the exit hopper label.

Checks

IBM cards

5-inch

8 ½-inch (A5)

Arrow Arrow

11-inch (A4)

14-inch (B3)

17-inch with adapter (A3)

2-8 A-61092 September 1999