Changing the ink roller
Feed several blank pages to ensure that the print quality is acceptable. If the endorsements are light or hard to read, you may need to replace the ink roller.
NOTE: Before replacing the ink roller, place a protective cover over the work surface near your machine. This protects your work surface from ink stains when you remove the old ink roller.
To change an ink roller:
1.Open the top cover.
2.Open the new ink roller container and remove the plastic gloves. Use the plastic gloves to keep your hands clean when handling the inked rollers.
3.Open the cover plate covering the ink roller and slide out the roller carrier holder.
Cover plate
Ink roller
Roller carrier holder
4.Carefully remove the ink roller by lowering it and removing it from the retaining slots. Use the paper to roll it up. Place it in a container and discard it.
5.Use your gloved hand to unwrap the new ink roller and install it into the roller carrier holder. Make sure the roller snaps into the retaining slots.
6.Open the cover plate and slide the roller carrier holder back into its original position, making sure it is fully seated.
7.Close the top cover.
|
