Kodak A-61092 manual Using the Check Feeder / Check Stacker, Using the check feeder

Using the Check Feeder / Check Stacker

Using the check feeder

The check feeder/check stacker provides continuous feeding of small- sized documents; such as, checks.

To use the check feeder, follow the procedures below:

NOTE: Thick documents may be processed with the check feeder installed by using the hand-feed throat with the gap release lever held down.

Check stacker

Front cover

Check guide

Left-side guide
					Side panel
	Hand-feed throat				switch
				Feeder top cover
		Gap release lever
			Gap adjustment knob

1.Adjust the feeder left-side guide to accommodate the width of the documents.

2.Turn on the side panel switch.

3.Adjust the feed and separator rollers for the thickness of the documents.

4.Properly prepare the documents, removing any staples, rubber bands, paper clips, or loose mending tape. Straighten any wrinkled edges and torn documents.

5.Make sure the documents are evenly stacked, with the leading and left edges square, for proper feeding and endorsement positioning (if documents are to be endorsed).

6.Place the documents against the check guide.

7.Press Run to feed the documents.

A-61092 September 1999 8-21