Cleaning the separator roller:

1.Open the front cover.

2.Push the roller cover release lever toward the back of the machine.

3.Grasp and rotate the roller cover toward the back of the machine, exposing the feeder module and separator roller.

Roller cover release lever

Roller cover

Feeder module

4. Lift and remove the separator roller cover plate.

5. Lift the separator roller out of the grooved brackets.

Separator roller

Grooved brackets

6.Clean the separator roller. Inspect the roller any areas where the white foam is showing through the roller cover. If the roller shows signs of wear, obtain and replace the separator roller.

7.Replace the separator roller by aligning the pins in the grooved brackets.

8.Reinsert the separator roller cover plate.

9.Close the feeder cover.

10.Close the front door.

5-6

A-61092 September 1999

Page 41
Image 41
Kodak A-61092 manual Cleaning the separator roller