Code
F17
F18
F19
F20
F21
F22
F23
F34
F37
F38
F39
F39
Function Code Name
Elapsed Time
Display Contrast
Display Language
Measurement System
Change Time
Change Date
Time and Date Display
Operator ID Number
Scanner Calibration
Scanner
Printer Character Shift (for Document Printer 12)
Print Contrast
(for Super12 Document
Printer)
Description
Allows you to display the number of hours the motor, transport and main power have been running, in addition to the
Meter A — displays
Allows you to adjust the contrast of the status display. Press the Up arrow to increase the contrast or press the Down arrow to decrease the contrast, then press Enter.
Allows you to choose your preferred language. Press the arrow key to toggle between two available options.
Allows you to choose your preferred measurement system. Press the arrow key to toggle between two available options.
Allows you to change the time. Enter the new time in the format illustrated and press Enter.
Allows you to change the date. Enter the new date in the format illustrated and press Enter.
Allows you to view the current time and date.
Allows you to display the current operator ID number and/or change to a new operator ID number. Enter a new operator ID up to 3 digits and press Enter.
Allows you to initiate the calibration process required before scanning documents. To do this, feed a calibration target into the scanner.
Allows you to signal the host computer that the last document of the job has been fed into the transport.
Allows you to select which set of ink jets will be used to print each character. Enter 1 to select the left set of ink jets, enter 2 to select the center set of ink jets, or enter 3 to select the right set of ink jets, then press Enter.
Allows you to increase or decrease the amount of ink put on the document. Press the Up arrow for more ink and press the Down arrow for less ink. Incremental values are: 12, 25, 37, 50, 62, 75, 87 and 100%.
|
