Function code listing Following is a listing of the function codes and descriptions.
Code
F01
F02
F04
F05
F06
F07
F08
F09
F10
F11
F12
F13
F14
F15
F16
Function Code Name
Select Mode
Restore Mode
Counting Only
Accessory Status
Terminate Batch
Level 0
Last Image Address
Total Document Count
Level 0 Count
Level 1 Count
Level 2 Count
Level 3 Count
Reset Level Counts
Alarm Volume
Alarm Tone
Description
Allows you to select one of the predefined application modes. Enter a value from 1 to 18 and press Enter.
Allows you to restore the current application mode to its default status, provided mode overrides are not saved.
Allows you to count the number of documents entering the scanner without scanning. Enter 1 to turn Counting Only on, or 0 to turn Counting Only off and press Enter.
Displays the current status of each accessory installed. Press the Down arrow to view the status of the next accessory, or press the Up arrow to view the status of the previous accessory.
Allows you to prematurely end a batch.
Allows you to define the next document scanned as a Level 0 document.
Allows you to display the image address of the last document scanned.
Allows you to display the total number of documents that entered the feeder (Level 3, Level 2, Level 1 or Level 0). Press 0 to reset the counter and then press Enter.
Allows you to display the total number of documents that have entered the feeder as Level 0 documents. Press 0 to reset the counter and then press Enter.
Allows you to display the total number of documents that have entered the feeder as Level 1 documents. Press 0 to reset the counter and then press Enter.
Allows you to display the total number of documents that have entered the feeder as Level 2 documents. Press 0 to reset the counter and then press Enter.
Allows you to display the total number of documents that have entered the feeder as Level 3 documents. Press 0 to reset the counter and then press Enter.
Allows you to reset all the level counters (Level 0, Level 1, Level 2, and Level 3) to 0.
Allows you to adjust the volume of the alarm. Press the Up arrow to increase the volume or press the Down arrow to decrease the volume, then press Enter.
Allows you to adjust the pitch of the alarm tone. Press the Up arrow to increase the pitch or press the Down arrow to decrease the pitch, then press Enter.
