Kodak A-61092 manual Maintenance, Cleaning tasks Cleaning materials Replacement parts

5 Maintenance

Cleaning tasks

Cleaning materials

Replacement parts

To keep your scanner in good operating condition, the following tasks should be performed:

∙Cleaning the imaging guides (daily)

∙Cleaning the feed and separator roller (semi-automatic feeder) (daily)

∙Cleaning the feeder module and separator roller (automatic feeder) (daily)

∙Cleaning the paper path (daily)

∙Vacuuming inside the scanner (daily)

∙Cleaning the exposure lamp housings (weekly)

∙Cleaning the cabinet (weekly)

∙Cleaning the air filter (monthly)

For additional maintenance and feeder adjustment information, see Kodak publication A-61604. This publication is part of the Maintenance and Feeder Adjustment procedure video; Catalog Number 828 5306.

Materials needed to perform maintenance procedures are:

∙A mild cleaning agent

∙A quality lens cleaner

∙A soft, clean, lint-free cloth

∙A soft-bristled cleaning brush

∙A vacuum cleaner

∙Staticide Wipes

∙Roller Cleaning Pads

∙Paper Path Cleaner

IMPORTANT: Do not use any unauthorized commercial cleaning solvent in any of the cleaning procedures.

Consumable parts that can be replaced by the customer include:

∙Air filter

∙Exposure lamps

∙Imaging guides

∙Automatic Document Feeder Module

∙Automatic Document Feeder Separator Roller

Instructions on how to replace these parts are included later in this chapter.

A-61092 September 1999 5-1