Feeding documents using the semi- automatic feeder
Following are document feeding instructions using the
1.Verify the side panel switch is on and that any adjustments have been made (feeder side guides, exit hopper side guides, etc.).
2.Press Run.
3.Select a stack of documents that is no more than 0.75 in. (19 mm) thick.
4.Fan the stack of documents so the leading edge of the top document engages the feed and separator rollers as shown:
Top
document
Fanned
documents
5.Place the stack of fanned documents into the feeder so the leading edge of the top document contacts the feed and separator rollers. The documents are drawn into the transport, with the top document being fed first. The documents are deposited in the exit hopper face down, in the order in which they were fed into the transport.
6.Repeat Steps 3 through 5 until all of the application documents have been fed into the transport.
7.Press Stop after all documents have been deposited in the exit hopper.
