Feeding thick documents

The gap release lever is used to feed thick documents such as card stock or cover stock. The lever is located on the front panel of the scanner, next to the gap adjustment knob.

 

 

 

 

 

 

 

(Graphic depicts movement

 

 

of separator rollers when

 

 

 

lever is used)

 

 

 

 

(Graphic depicts gap

 

 

Gap

 

adjustment)

 

 

release

 

 

 

 

lever

 

 

 

 

 

 

 

 

 

 

1.Press down and hold the gap release lever. This opens the gap between the feed and separator rollers, allowing thick documents to pass between them. You will be able to see the gap open as the lever is pushed down.

2.Insert the thick document past the rollers until it is taken into the transport system.

NOTE: If more than one thick document is to be scanned, feed them into the transport one at a time.

 

 

Gap release

 

 

lever

Feed roller

 

(hold down)

 

 

 

 

 

 

Gap

Separator

roller

Thick

document

3.After the thick document(s) have been scanned, release the gap release lever; it will return to its original position. The feed and separator rollers will return to their previously adjusted positions.

3-4

A-61092 September 1999

Page 24
Image 24
Kodak A-61092 manual Feeding thick documents