Code

Function Code Name

F40

All Document Printers

 

On/Off

 

(for Document Printers 1

 

and 12)

F40

Print Head Position

 

(for Super12 Document

 

Printer)

 

 

F41

Primary DP1 On/Off

 

 

F42

Secondary DP1 On/Off

 

 

F43 Document Printer 12/

Super12 On/Off

F44 Omit Printing on the Next Document Only

F45

Print Test (for Document

 

Printers 1 and 12)

 

 

F45

Print Test

 

(for Super12 Document

 

Printer)

 

 

Description

Allows you to turn all Document Printers (primary DP1, secondary DP1 and DP12) on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

Allows you to change the print heads or clean the printer. This function can only be performed when the transport is off. Enter 1 to Change Heads or 2 to Clean Printer, then press Enter.

Allows you to turn the primary Document Printer 1 on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

NOTE: If the Super12 Document Printer is installed, a message indicating “Unassigned Function” will be displayed.

Allows you to turn the secondary Document Printer 1 on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

NOTE: If the Super12 Document Printer is installed, a message indicating “Unassigned Function” will be displayed.

Allows you to turn the Document Printer 12 or Super12 Document Printer on or off. Enter 1 to turn on or 0 to turn off, then press Enter.

Allows you to specify no information be printed on the next document scanned. Printing will resume on subsequent documents. Enter 1 to omit printing on the next document, or enter 0 to print on the next document then press Enter.

NOTE: If you enter F44 and then F45, the Omit Printing Status on Next Document will be cleared.

Allows you to test the position and print quality of all Document Printers installed. Enter the number of the print test you want to perform.

1=Print IA test

3=Shift test

2=Prime test

4=Standard test

This function can be done when the transport is off.

Allows you to test the position and print quality of the Super12 Document Printer. Enter the number of the print test you want to perform.

1=Mode Image — will print the current image for the level and mode you are in.

2=Test Pattern — will print a preloaded test image.

This function can be done when the transport is off.

NOTE: If you enter F44 and then F45, the Omit Printing Status on Next Document will be cleared.

A-61092 September 1999

4-7

Page 32
Image 32
Kodak A-61092 manual Code Function Code Name