Daily maintenance procedures
Cleaning the imaging guides
Maintenance procedures that should be performed daily include cleaning the imaging guides, the feed and separator rollers, the paper path and vacuuming inside the scanner.
To clean the imaging guides, follow the steps below:
IMPORTANT: Do not use any abrasive materials when cleaning the imaging guides. This includes abrasive cleansers, commercial solvents, paper towels, or coarse cloths.
1.Open the right-side access door.
NOTE: The illustration below shows the rear view of the scanner.
Upper lamp housing assembly
Upper imaging guide
Lower image guide
Lower lamp housing assembly
Upper imaging guide
Lower imaging guide
2.Locate and grasp the end of the upper imaging guide. Carefully slide the imaging guide out of its track.
3.Locate and grasp the end of the lower imaging guide. Carefully slide the imaging guide out of its track.
|
