Clearing the document path
The document path
If a document becomes lodged in the scanner transport system, the system stops running and a message appears in the status display.
A document can become lodged in the transport system when:
∙Documents are not fed straight (skewed).
∙Documents are torn, badly folded, or wrinkled.
∙Staples and paper clips were not removed from documents.
∙Imaging guides are not seated properly or are not installed.
∙Transport system baffle plates are not firmly closed.
The document path can be cleared easily because:
∙No tools are needed.
∙
There are six areas in the transport system where documents may become lodged and need to be removed:
E
F
D
C
A
B
AThe feeder/horizontal transport area
BThe imaging guide area
CThe lower roller assembly area
DThe vertical transport area
EThe upper turn area
FThe document exit area
|
