Dynamic bar code evaluation

Dynamic Bar Code Evaluation allows you to verify the speed of the Bar Code Reader and how well your Bar Code Reader is working. This test is performed with the transport on. Follow the procedures below to perform the Dynamic Bar Code Evaluation test.

After selecting option 2=Transport On, the following message is displayed:

Bar Code Type=

Leading edge distance (in):

1.Measure the distance from the leading edge of the document to the center of the bar code.

leading edge

distance measured

center of bar code

2.Enter the distance from the leading edge of the document to the center of the bar code.

3.Press Enter. The transport will turn on.

4.Feed the bar code document.

5.Go to the section entitled, “Evaluating test results” to review the test results.

8-14

A-61092 September 1999

Page 82
Image 82
Kodak A-61092 manual Dynamic bar code evaluation