Roland G6037008-01, ME-70 Calling Up Tones Patches, Changing Tone Settings Memory Edit Mode

Saving/Calling Up and Using Tones (Memory Mode)

Calling Up Tones (Patches)

To switch patches, use BANK [	] [	] and the number pedals	1.
(1-4).
			2.
2		1

Press BANK [ ] [ ].

Choose the bank number to which you want to switch.

The displayed bank number flashes. (At this time, the tones are not yet switched.)

For the bank number, you can choose a user bank from U1 through U9 or a preset bank from P1 through P9.

Pressing number pedals 1 and 2 at the same time enables bank selection using number pedals 1 and 2. After choosing the bank, you confirm the selection by

pressing number pedal 3 or 4.

Press any one of the number pedals from 1 through 4.

The unit switches to the patch with in the bank number you chose in Step 1.

English

When you're selecting a patch within the same bank, you can skip Step 1.

You can also switch bank numbers using a foot switch. For more information, read “Using External Foot Switches” (p. E-13).

Changing Tone Settings (Memory Edit Mode)

In Memory mode, editing effects or changing the noise-suppressor	1.	Refer to “Calling Up Tones (Patches)” and call up the
threshold (NS THRES) is not possible.		patch whose settings you want to change.
When you want to make these changes, put the unit in Memory Edit	2.	Press [EDIT/EXIT].
mode.

The unit switches to Memory mode and “Ed” appears in the display.

2, 4	3	3.	Use the controls, pedals, and buttons to modify the
			tone.
			In Memory Edit mode, in Manual mode, the number pedals switch
			effects on and off, and [	] and [	] manipulate the NS THRES
			parameter.
		4.	Press [EDIT/EXIT].
			The unit returns to Memory mode.
		5.	If you want to save the tone whose settings you've
			changed, carry out a patch-write operation (p. E-10).
			Until you perform a patch-write operation, switching off the power or changing
			patches will cause any tones you've created to be lost.

Deutsch

Français

Italiano

Español

Português Nederlands

E-11