Creating Sounds

AC Adaptor PSA series (sold separately)

Be sure to use a PSA series adaptor. The use of any other adaptor may cause malfunction.

To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the illustration.

Connect a commercially available anti-theft security cable here. http://www.kensington.com/

PCS-31L cable

 

(Sold separately)

Digital Recorder, etc.

White (L)

Red (R)

￿Inserting a plug into the REC OUT/PHONES jack automatically activates the built-in guitar-amp simulator, enabling you to enjoy impressive guitar sound even with headphones.

The same effect is applied to Gt. AMP OUTPUT at this time, too.

￿When you're performing using a guitar amp connected to Gt. AMP OUTPUT, disconnect the plug from the REC OUT/PHONES jack.

Adjusting the Volume

1.Adjust the OUTPUT LEVEL knob.

English

ŒRaising the OUTPUT LEVEL knob too much may result in sound distortion.

ŒWhen the OUTPUT LEVEL knob is centered and all effects are off, input and output are at the same level.

Turning Off the Power

Deutsch

 

1. Turn down the volume all the way on all equipment

 

(this unit, the amplifier, and everything else).

 

2. Switch off the amp and other connected devices.

Français

3. Unplug the guitar or other instrument connected to

 

the INPUT jack on the ME-70.

 

The power to the ME-70 is switched off.

 

Should you encounter unexpected results,

Italiano

such as no sound being produced, check the

following.

 

• Are connections to other devices correctly made?

 

Check the connections once more.

 

• Is the volume turned down?

Español

Check the volume levels on any connected amp or mixer.

• Can you hear sound through the headphones when

 

headphones are connected?

 

If you can hear sounds, it may be that there is a short in the cable

 

used to connect the amp or other device, or perhaps a mistake in

 

an external device’s settings. Check the connecting cables and

Português

external devices once more.

• Has the level been lowered with the expression pedal?

Sounds are not output when the toe of the expression

 

pedal is in the raised position while the pedal is set to

 

function as a volume pedal (p. E-9).

 

 

Nederlands

Expression

 

Pedal

 

E-3

Page 3
Image 3
Roland G6037008-01 Adjusting the Volume, Turning Off the Power, Adjust the Output Level knob, Input jack on the ME-70