Convenient Functions
Creating Tones with Ease (EZ Tone)
EZ Tone is a feature for creating sounds quickly and easily by calling up saved parameter settings for each individual effect type.
The
Choosing (Calling Up) an EZ Tone
When EZ TONE is on, you call up the saved settings for an effect with its TYPE knob.
2 | 1 |
1.Press [EZ TONE].
The EZ TONE indicator lights.
You can use the number pedals to switch the effects on and off, allowing you to check each effect's sound by itself.
To switch off PREAMP, use the TYPE knob to select OFF.
2.Use an effect’s TYPE knob to choose its EZ Tone.
Optimal effect parameters for the chosen TYPE value are set automatically.
After you choose an EZ Tone, you can use the effect's controls to
sound as desired.
Saving the Created Tone as an EZ Tone
If you edit an EZ Tone with an effect's controls, you can save the | 1. Hold down [EZ TONE] and press [WRITE]. |
changes. | The indicator for the |
1 | 3 | 2 |
|
| 2. |
|
| 3. |
Pressing only [WRITE] commences the procedure for saving the current settings for all effects as a patch.
Use BANK [ 
] and [ 
] to choose the effect you want to save.
The selection cycles through the choices in this sequence, with the current choice flashing: COMP/FX OD/DS MODULATION DELAY
PREAMP all effects COMP/FX ...
When you select “all effects,” you’re saving the EZ Tones for every effect.
Press [WRITE].
The edited EZ Tone is stored in memory at the location now selected by the TYPE knob.
| Performing a save operation causes any previous EZ Tone already saved at the |
| TYPE destination to be lost. |
|
|
Checking the Values of Controls |
|
|
|
Operations such as calling up patches or EZ Tones may result in | 1. Hold down [EDIT/EXIT] and turn the control for the |
discrepancies between the set parameters and the positions shown | value you want to check. |
by the controls. | The value of the control appears in the display for a brief time. |
You can get the actual parameter values to appear in the display so |
|
you can check them. |
|
