Convenient Functions
Applying Effects in Time with the Song Tempo (Tap Tempo)
When the DELAY effect is set to TAP, you can set the delay's tempo | 1. Set the DELAY effect's TYPE knob to TAP. |
by pressing a pedal in time with tempo of a song. | The pedal's indicator flashes in time with the currently set delay time. |
2.
This section describes how to carry out the operation when in Manual mode. When you're in Memory mode, you can accomplish the same operation by using the number pedal for the currently selected patch.
3.
Timing
Delay Sound
TIME knob
Set the TIME knob at or .
Choose the rhythm for the delay sound that's produced (dotted eighth note or quarter note).
Press the DELAY pedal at least twice in time with the song's tempo.
The timing of the delay sound is determined by the timing with which you press the pedal. The
Setting Modulation Speed and Delay Time Using the Pedals
In addition to adjusting the speed (frequency) of modulation and | 1. Use the TYPE knobs for the MODULATION and |
the delay time using the knobs, you can also set the timings you | DELAY effects to choose the desired effects types. |
want using the pedals. |
|
|
|
|
| When one of the TYPE settings shown below has been selected for the | |
|
|
|
| MODULATION or DELAY effect, the settings described in this section cannot be | |
|
|
|
| made using the pedals. |
|
|
|
|
| Effect | TYPE value |
|
|
|
| MODULATION | HARMONIST |
|
|
|
|
| OCTAVE |
|
|
|
| DELAY | MOMENTARY |
|
|
|
|
| TAP |
|
|
|
|
| PHRASE LOOP |
|
|
|
| If you wish to select TAP as the DELAY effect, use the procedure described in | |
Pedal | 1 | 1 | “Applying Effects in Time with the Song Tempo (Tap Tempo)” to set the delay | ||
time with a pedal. |
| ||||
Indicators |
|
|
This section describes how to carry out the operation when in the Manual mode. When you're in the Memory mode, you can accomplish the same operation by using the number pedal for the currently selected patch.
When you're in Memory mode and the MODULATION and DELAY effects are both on, you can make the setting for only the delay time.
2.Hold down the MOD or DELAY pedal for at least two
seconds.
Two seconds after you begin pressing the pedal, the pedal's indicator starts to flash.
3.Press the MOD or DELAY pedal at least twice at the
speed you want.
The speed of the effect is set by the timing with which you press the pedal. The pedal's indicator flashes in time with the modulation rate or the delay sound.
4.Once again hold down the MOD or DELAY pedal for
at least two seconds.
The setting for the speed is completed, and the effect is turned on. The pedal's indicator stops flashing and stays steadily illuminated.
After you've finished making the settings, moving the RATE knob or the TIME knob deactivates the effect timing set using the pedal and returns priority to the knob setting.