Bradford-White Corp M2TW65T*F Remove blower to gain access to system from exhaust, Flue baffle

Page 33

TTW SERVICE PROCEDURE XII

Flue Baffle

Inspection and replacement

Disconnect vent

Remove blower to gain access to system from exhaust

adapter.

flue baffle

Step 1.

Position gas control power switch to the “OFF” position

33

 

and unplug blower from wall outlet.

Step 2. Disconnect vent system from exhaust adapter on top of blower.

Step 3. Unplug cord sets from blower. (see photo 33).

Step 4. Remove the three blower mounting screws (¼" nut driver) (see photo 33).

 

 

Blower

Step 5.

Remove blower with gasket from water heater.

Cord Sets

Step 6.

Remove flue baffle from Heater (see photo 34).

34

 

 

Step 7. Inspect baffle for deterioration, missing restrictors. Clean any scale or debris build up. Replace with new baffle as necessary.

Step 8. Reinstall baffle into flue tube. Be sure baffle hanger tab are inserted into notch location at the top of the flue tube (see photos 35 & 36).

Step 9 Check Burner to insure no scale has accumulated during this operation. See burner cleaning procedure on page 15.

Step 10. Reinstall blower on water heater. Connect vent

35

 

system and cord sets to blower. Plug water heater

 

into wall outlet.

 

Step 11. To resume operation follow the lighting instruction located on the lighting instruction label or the lighting instruction located in the installation and operation manual.

Flue tube

notch

36

Blower Mounting

Screws

Flue Baffle

Baffle shown

installed in flue

tube notch.

PagePage33 33

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Service Manual Through-The-Wall Gas Water Heaters For Your Safety Introduction How to Use This Manual Specifications Vent Tables Vent Tables Control Timings Sequence of Operation Steady state operation Pressure Switch/Blower Temperature Fault Troubleshooting Eight-one flash, three Vapor Sensor Burner Inspection and Air Shutter Adjustment Burner Cleaning Pilot Inspection, Testing and Replacement Pressure Switch Testing Pressure Switch Replacement Pressure tap Blower TestingRemove exhaust Blower Temperature Switch Testing Blower Temperature Switch Replacement Thermal Well Testing Gas Control TestingDetermine Water Temperature Inside Tank Gas Control Removal From Thermal Well Gas Control & Thermal Well Removal From Water HeaterGas Control Assembly to Thermal Well Flammable Vapor Device Testing Red wire leading to blower temperature N Safety Circuit Voltage TraceVAC Circuit Trace Dip Tube Inspection and Replacement Anode Inspection and Replacement Flue baffle Remove blower to gain access to system from exhaustInner Door Gasket Replacement Procedure Inner Door Removal ProcedureInstallation of Inner Door With Gasket Replace outer jacket burner access door ScreenLok Flame Arrestor Cleaning Glossary of Terms Parts List Parts@bradfordwhite.com Techserv@bradfordwhite.com

M4TW40T*F, M1TW50S*F, M2TW50T*F, M4TW50T*F, M4TW60T*F specifications

Bradford-White Corporation is a leading manufacturer of water heating and storage solutions, known for its commitment to quality and innovation. Among its impressive product lineup, the M2TW65T*F, TW465S65F, TW450S65F, M1TW40S*F, and M1TW60T*F models stand out for their reliability and advanced technology suitable for both residential and commercial applications.

The M2TW65T*F model is distinguished by its high efficiency and performance. It features a 65-gallon capacity, which is ideal for households that require a significant amount of hot water. This model is equipped with an innovative electronic ignition system that enhances energy efficiency while providing reliable hot water on demand. Additionally, it includes advanced insulation technology that minimizes heat loss, ensuring that water remains hot for extended periods.

The TW465S65F and TW450S65F are other exemplary models in the Bradford-White lineup, boasting impressive storage capabilities. Both models offer a combination of a 65-gallon tank and powerful burner systems that significantly reduce recovery time, meaning users can enjoy hot water faster. These models are designed with a user-friendly control panel, making adjustments and monitoring water temperature straightforward. Their robust construction ensures durability and longevity, making them a smart investment.

For smaller households or spaces, the M1TW40S*F and M1TW60T*F models provide excellent options without compromising performance. The M1TW40S*F, with a 40-gallon capacity, is specifically designed for efficiency in limited spaces, while the M1TW60T*F offers extra capacity for larger demands. Both models utilize Bradford-White's state-of-the-art gas burner technology, promoting energy conservation while delivering consistent hot water.

All models are built with a high-quality glass-lined tank to protect against corrosion, further enhancing their lifespan. The incorporation of Bradford-White's exclusive EverKlean technology in their tank designs minimizes sediment buildup, ensuring clean and efficient operation over time.

In addition to their standout performance and efficiency, Bradford-White products prioritize safety. Built-in safety features, such as the temperature and pressure relief valve and advanced venting designs, provide peace of mind for users. These models not only meet but often exceed industry standards for safety and efficiency.

Bradford-White's commitment to innovation and quality is reflected in the M2TW65T*F, TW465S65F, TW450S65F, M1TW40S*F, and M1TW60T*F models, making them excellent choices for anyone in need of reliable hot water solutions. With their advanced technologies, durability, and energy efficiency, these water heaters are ideal for diverse applications in modern homes and businesses.
Top Page Image Contents